Hardenable martensitic stainless steel
with V addition
Material number:
1.4112
Standard EN:
X 90 CrMoV 18, ~ AISI 440 B
Re-melting:
ESR
Machinability:
up to satisfactory
Hardening capability:
up to 58 HRc
Polishing ability:
adapted for mirror polishing
Corrosion resistance:
satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
Distinctive features and main attributes: Chronifer M-17B is, except of the Mo content, equivalent to Aisi 440B, a hardenable, alloyed stainless steel, optimized for high hardness, characterized by good corrosion and abrasion resistance provided the final part has been polished properly (without pores). Due to its higher carbon content, it is superior to Chronifer Labor M-13 (420 Series). For optimum corrosion resistance, the surface must be free of scale and foreign particles and finished parts should be passivated. However, the machinability is limited with high tool wear, whereas corrosion resistance to water and steam is fine once the parts are heat treated (max. hardness 58 HRC) and polished. The annealed execution with ESR process, combined with a tight size tolerance and straight bars helps to improve the machinability of our Chronifer M-17B. Use and application range: this alloy meets the requirement of medical instruments and dental cutting tools such as bone drills, knives and cutlery, punch disks, ball bearings, screw extruders and spray nozzles. It fulfills most parameters of the medical norms ASTM F-899 (only the Mo content of Chronifer M-17B is higher than F-899, but this higher content increases the corrosion resistance of Chronifer M-17B).
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
hardenable stainless steel
drawn, ground, in 3m bars
diam. 1.50 mm, tolerance ISO h6
bars 3m
ground
h 6
20 kg
0
080 818 - 19.858
1-500
bars-3m
ground
h-6-en
1.000
46100501000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in coils
diam. 1.00 mm, tolerance ISO fg8
in spools
drawn
fg 8
73 kg
0
160 801 - 73.000
1-000
in-spools
drawn
fg-8-en
1.000
46103201000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in 2m bars
diam. 1.00 mm, tolerance ISO h8
bars 3m
drawn
h 8
16 kg
0
160 801 - 16.400
1-000
bars-3m
drawn
h-8-en
3.000
46100503000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in coils
diam. 3.00 mm, tolerance ISO fg8
in spools
drawn
fg 8
179 kg
0
030 703 - 178.600
3-000
in-spools
drawn
fg-8-en
2.700
46100502700
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in coils
diam. 2.70 mm, tolerance ISO fg8
in spools
drawn
fg 8
257 kg
0
030 703 - 256.700
2-700
in-spools
drawn
fg-8-en
4.000
46113004000
Chronifer M 17 B
no 1.4112, X90CrMoV18,~AISI 440B
as per EN 10088-3, ESR remelted
AMS QQ-S-763F
hardenable stainless steel
annealed, ground, polished, stress relieved
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl. 4
diam. 4.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
2100
280 622 - 38.903
4-000
bars-3m
ground
h-6-en
5.500
46113005500
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 5.50 mm, tolerance ISO h6
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
as per EN10277-1, tab. 1, class 4
diam. 7.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1236 kg
0
091 121 - 440.700|210 824 - 795.000
7-000
bars-3m
ground
h-6-en
2.100
46103202100
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in 3m bars
pointed/chamfered
diam. 2.10 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
2-100
bars-3m
drawn
h-8-en
1.300
46100501300
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in coils
diam. 1.30 mm, tolerance ISO fg8
in spools
drawn
fg 8
55 kg
0
231 097 - 54.900
1-300
in-spools
drawn
fg-8-en
1.500
46100501500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
as per DIN EN 10088-3
cold drawn, polished, in coils
diam. 1.50 mm, tolerance ISO fg8
in spools
drawn
fg 8
2 kg
0
090 893 - 2.100
1-500
in-spools
drawn
fg-8-en
2.000
46100502000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in coils
diam. 2.00 mm, tolerance ISO fg8
in spools
drawn
fg 8
181 kg
0
170 797 - 132.200|200 891 - 48.500
2-000
in-spools
drawn
fg-8-en
2.100
46100502100
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in coils
diam. 2.10 mm, tolerance ISO fg8
in spools
drawn
fg 8
276 kg
0
150 201 - 276.400
2-100
in-spools
drawn
fg-8-en
1.300
46103201300
Chronifer M 17 B
no 1.4112, X90CrMoV18,
per DIN EN 10088-3, ~AISI 440B
hardenable stainless steel
drawn, polished, in 3m bars
diam. 1.30 mm, tolerance ISO h8
bars 3m
drawn
h 8
2 kg
0
231 097 - 2.039
1-300
bars-3m
drawn
h-8-en
1.500
46103201500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in 3m bars
diam. 1.50 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
1-500
bars-3m
drawn
h-8-en
1.650
46103201650
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in 3m bars
diam. 1.65 mm, tolerance ISO h8
bars 3m
drawn
h 8
14 kg
0
210 186 - 13.670
1-650
bars-3m
drawn
h-8-en
2.000
46102202000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in 2m bars
diam. 2.00 mm, tolerance ISO h8
bars 2m
drawn
h 8
3 kg
0
291 091 - 3.104
2-000
bars-2m
drawn
h-8-en
2.350
46113002350
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 2.35 mm, tolerance ISO h6
bars 3m
ground
h 6
561 kg
0
160 799 - 66.194|190 411 - 495.000
2-350
bars-3m
ground
h-6-en
5.000
46113005000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3, ~ASTM F-899-20
ISO 7153-1 Ref. R, NF S94 090 (chem.)
ESR remelted, hardenable stainless steel,
conforme EG/2002/95 ROHS directive
annealed, ground, polished,
in 3m bars (+40/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl. 4
diam. 5.00 mm, tolerance ISO h6
bars 3m
ground
h 6
789 kg
800
220 523 - 1088.850
5-000
bars-3m
ground
h-6-en
6.000
46113006000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl.4
diam. 6.00 mm, tolerance ISO h6
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3 12/14, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 8.00 mm, tolerance ISO h6
bars 3m
ground
h 6
700 kg
0
160 523 - 2.300|211 123 - 697.400
8-000
bars-3m
ground
h-6-en
12.500
46113212500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per DIN EN 10088-3
hardenable stainless steel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 12.50 mm, tolerance ISO h8
bars 3m
ground
h 8
301 kg
0
130 801 - 301.300
12-500
bars-3m
ground
h-8-en
12.700
46113112700
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3, ~ ASTM A276-08a
hardenable stainless steel
annealed, ground, polished,
in 3m bars (+50/0mm)
pointed/chamfered, eddy current tested
diam. 12.70 mm (1/2″), tolerance ISO h7
bars 3m
ground
h 7
250 kg
0
200 603 - 0.600|250 804 - 249.109
12-700
bars-3m
ground
h-7-en
2.500
46100502500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
as per DIN EN 10088-3
hardenable stainless steel
drawn, polished, in coils
diam. 2.50 mm, tolerance ISO fg8
in spools
drawn
fg 8
149 kg
0
030 703 - 149.400
2-500
in-spools
drawn
fg-8-en
3.000
46113003000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3, ESR remelted
NF S94 090, ISO 7153-1 Ref. R,
hardenable stainless steel
cold drawn, annealed, ground, polished
in 3m bars (+30/0mm)
End of bars: pointed,chamfered
100% eddycurrent crack tested cl. 4
diam. 3.00 mm, tolerance ISO h6
bars 3m
ground
h 6
685 kg
0
180 512 - 0.612|270 324 - 684.700
3-000
bars-3m
ground
h-6-en
3.500
46113003500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per DIN EN 10088-3
hardenable stainless steel, ESR
drawn, annealed, ground, polished,
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
100% eddy current crack tested cl. 4
diam. 3.50 mm, tolerance ISO h6
bars 3m
ground
h 6
489 kg
0
130 318 - 25.446|050 220 - 463.600
3-500
bars-3m
ground
h-6-en
4.500
46113004500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per DIN EN 10088-3, ESR remelted
hardenable stainless steel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 4.50 mm, tolerance ISO h6
bars 3m
ground
h 6
583 kg
0
120 312 - 49.500|070 616 - 533.700
4-500
bars-3m
ground
h-6-en
2.500
46113002500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
hardenable stainless steel
as per DIN EN 10088-3
ESR remelted, drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
eddycurrent crack tested
diam. 2.50 mm, tolerance ISO h6
bars 3m
ground
h 6
424 kg
0
120 712 - 327.734|111 114 - 96.100
2-500
bars-3m
ground
h-6-en
12.000
46113012000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 12.00 mm, tolerance ISO h6
Chronifer M 17 B
W-Nr.1.4112, X90CrMoV18, ~AISI 440B
ESU Rev. 6 2018-11, UNS S44003
EN 10088-3 2014, NF S94 090, ASTM F899
ASTM A276/A276M 2017, ISO 7153-1, 2017
AMS QQS 763F, ASTM A 959 2016-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered
100% eddy current crack tested cl. 4
diam. 18.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
0 kg
2600
030 320 - 6.400|240 424 - 395.800
18-000
bars-3m
ground
h-6-en
9.500
46113109500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
recuit, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 9.50 mm, tolerance ISO h7
bars 3m
ground
h 7
2 kg
0
181 203 - 1.600
9-500
bars-3m
ground
h-7-en
1.200
46103201200
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, in 3m bars
diam. 1.20 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
1-200
bars-3m
drawn
h-8-en
3.350
46113103350
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, ground, polished, in 3m bars
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 3.35 mm, tolerance ISO h7
bars 3m
ground
h 7
407 kg
0
020 905 - 407.400
3-350
bars-3m
ground
h-7-en
9.000
46113009000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
eind of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 9.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested cl. 4
diam. 10.50 mm, tolerance ISO h6
bars 3m
ground
h 6
483 kg
0
250 919 - 483.300
10-500
bars-3m
ground
h-6-en
16.000
46113016000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
ultrasonic inspected per EN 10308
diam. 16.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 6.35 mm,(1/4″) tolerance ISO h6
bars 3m
ground
h 6
703 kg
0
090 120 - 702.550
6-350
bars-3m
ground
h-6-en
7.500
46113107500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
suivant DIN EN 10088-3
hardenable stainless steel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 7.50 mm, tolerance ISO h7
bars 3m
ground
h 7
103 kg
0
040 705 - 102.700
7-500
bars-3m
ground
h-7-en
2.600
46113002600
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
~ASTM F-899, NFS 94090
EN 10088-3 12/14 and QQS 763
ISO 7153-1, Ref. Letter R
as per norm Bosch F028X50351
hardenable stainless steel, ESR remelted
cold drawn, annealed, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
eddycurrent crack tested cl.4
diam. 2.60 mm, tolerance ISO h6
bars 3m
ground
h 6
559 kg
0
030 419 - 558.706
2-600
bars-3m
ground
h-6-en
22.000
46113022000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished
in 3m bars (+50/0mm)
end of bars: pointed/chamfered
100% eddy current crack tested cl. 4
diam. 22.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3 12/14, and QQ-S-763F
hardenable stainless steel,ESR remelted
cold drawn, annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 4.65 mm, tolerance ISO 286-2/h6
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3, NF S94 090
hardenable stainless steel
drawn, ground, polished, in 3m bars
end of bars: chamfered,
eddy current crack tested
diam. 2.65 mm, tolerance ISO h6
bars 3m
ground
h 6
498 kg
0
040 912 - 13.500|100 919 - 484.500
2-650
bars-3m
ground
h-6-en
9.100
46113009100
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered
100% eddy current crack tested cl. 4
diam. 9.10 mm, tolerance ISO h6
bars 3m
ground
h 6
138 kg
0
170 913 - 137.900
9-100
bars-3m
ground
h-6-en
14.000
46113014000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NF S94 090, ~ASTM F899-20
~ASTM A276/A276M-17, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-16
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered
100% eddy current crack tested cl. 4
ultrasonic inspected EN10308 Tab.1 Typ 1a
diam. 14.00 mm, tolerance ISO h6
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
hardenable stainless steel
ESR remelted, as per EN 10088-3
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 5.10 mm, tolerance ISO h6
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 1088-3, ESR remelted
hardenable stainless steel
cold drawn, annealed, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 4.10 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
500
0
4-100
bars-3m
ground
h-6-en
19.000
46113019000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered
100% eddy current crack tested cl. 4
diam. 19.00 mm, tolerance ISO h6
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
ground, in 3m bars
diam. 0.90 mm, tolerance ISO h7
bars 3m
ground
h 7
2 kg
0
160 801 - 1.525
0-900
bars-3m
ground
h-7-en
3.100
46113003100
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3 9/05, ~ASTM F-899
hardenable stainless steel
ESR remelted
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
eddycurrent crack tested
diam. 3.10 mm, tolerance ISO h6
bars 3m
ground
h 6
390 kg
0
050 811 - 389.700
3-100
bars-3m
ground
h-6-en
2.100
46113002100
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per DIN EN 10088-3
hardenable stainless steel
ESR remelted
drawn, ground, polished,
in 3m bars (+30/0mm)
pointed/chamfered, crack tested
diam. 2.10 mm, tolerance ISO h6
bars 3m
ground
h 6
368 kg
0
180 209 - 14.352|191 219 - 354.000
2-100
bars-3m
ground
h-6-en
3.200
46100503200
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3, ESR remelted
hardenable stainless steel
drawn, polished, in coils of ~50kg
diam. 3.20 mm, tolerance ISO fg8
in spools
drawn
fg 8
400 kg
0
150 408 - 399.800
3-200
in-spools
drawn
fg-8-en
21.000
46113021000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 21.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
~ASTM F-899, NFS 94090
EN 10088-3 and QQS 763
hardenable stainless steel
ESR remelted,ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
eddycurrent crack tested
diam. 2.20 mm, tolerance ISO h6
bars 3m
ground
h 6
55 kg
0
200 110 - 55.080
2-200
bars-3m
ground
h-6-en
3.200
46113003200
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
hardenable stainless steel
as per DIN EN 10088-3
ESR remelted
cold drawn, ground, polished
in 3m bars (+30/0mm)
pointed and chamfered ends
eddy current crack tested
diam. 3.20 mm, tolerance ISO h6
bars 3m
ground
h 6
1075 kg
0
250 908 - 748.000|230 709 - 326.800
3-200
bars-3m
ground
h-6-en
25.000
46113025000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 25.00 mm, tolerance ISO h6
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
per EN 10088-3, ESR remelted
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 4.20 mm, tolerance ISO h6
bars 3m
ground
h 6
453 kg
0
171 208 - 453.442
4-200
bars-3m
ground
h-6-en
30.000
46113030000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3 12/14, NFS 94 090, ~ASTM F899
~ASTM A276/A276M-17 ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-16,~UNS S44003
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested, cl. 4
diam. 30.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1017 kg
0
130 721 - 196.500|240 821 - 820.000
30-000
bars-3m
ground
h-6-en
1.700
46100701700
Chronifer M 17 B
no 1.4112, X90CrMoV18,~AISI 440B
as per DIN EN 10088-3
hardenable stainless steel
ESR remelted
cold drawn, polished, in coils
diam. 1.70 mm, tolerance ISO fg7
in spools
drawn
fg 7
354 kg
0
140 109 - 161.300|200 224 - 193.000
1-700
in-spools
drawn
fg-7-en
1.600
46100701600
Chronifer M 17 B
no 1.4112, X90CrMoV18,~AISI 440B
as per DIN EN 10088-3, NF S94 090
hardenable stainless steel, ESR remelted
cold drawn, polished, in coils of apprx. 20kg
diam. 1.60 mm, tolerance ISO fg7
in spools
drawn
fg 7
462 kg
0
091 220 - 205.300|291 123 - 257.000
1-600
in-spools
drawn
fg-7-en
1.500
46100701500
Chronifer M 17 B
no 1.4112, X90CrMoV18,
as per DIN EN 10088-3, ~AISI 440B
hardenable stainless steel
ESR remelted
cold drawn, polished, in coils
diam. 1.50 mm, tolerance ISO fg7
in spools
drawn
fg 7
329 kg
0
291 123 - 329.000
1-500
in-spools
drawn
fg-7-en
11.500
46113011500
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered
100% eddy current crack tested cl. 4
diam. 11.50mm, tolerance ISO h6
bars 3m
ground
h 6
95 kg
0
221 008 - 95.000
11-500
bars-3m
ground
h-6-en
4.000
46113804000
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, ground, in 3m bars
diam. 4.00 mm, tolerance ISO h4
bars 3m
ground
spec.
5 kg
0
271 198 - 4.600
4-000
bars-3m
ground
spec-en
5.000
461138050001
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per DIN EN 10088-3
hardenable stainless steel
drawn, ground, in 3m bars
diam. 5.00 mm, tolerance ISO h4
bars 3m
ground
spec.
4 kg
0
180 998 - 3.600
5-000
bars-3m
ground
spec-en
8.500
461130085001
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered
100% eddy current crack tested cl. 4
diam. 8.50 mm, tolerance ISO h6
bars 3m
ground
h 6
71 kg
0
091 208 - 70.700
8-500
bars-3m
ground
h-6-en
1.800
46100701800
Chronifer M 17 B
no 1.4112, X90CrMoV18,~Aisi 440B
as per DIN EN 10088-3
hardenable stainless steel
ESR remelted
cold drawn, polished, in coils
diam. 1.80 mm, tolerance ISO fg7
in spools
drawn
fg 7
224 kg
0
181 109 - 223.500
1-800
in-spools
drawn
fg-7-en
23.000
46113023000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested cl. 4
diam. 23.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1404 kg
0
071 019 - 213.300|210 120 - 1191.000
23-000
bars-3m
ground
h-6-en
2.300
46113002300
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 2.30 mm, tolerance ISO h6
bars 3m
ground
h 6
150 kg
0
030 501 - 11.000|170 305 - 139.100
2-300
bars-3m
ground
h-6-en
28.000
46113028000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 28.00 mm, tolerance ISO h6
bars 3m
ground
h 6
760 kg
0
170 712 - 760.400
28-000
bars-3m
ground
h-6-en
2.700
46113002700
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
as per DIN 10088-3, QQS 763
as per NF S 94090, ~ASTM F-899
hardenable stainless steel
ESR remelted,ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
eddycurrent crack tested
diam. 2.70 mm, tolerance ISO h6
bars 3m
ground
h 6
174 kg
0
070 110 - 50.000|110 210 - 123.500
2-700
bars-3m
ground
h-6-en
2.800
46113002800
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
~ASTM F-899, NFS 94090
EN 10088-3 and QQS 763
hardenable stainless steel
ESR remelted,drawn,ground,polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
eddycurrent crack tested
diam. 2.80 mm, tolerance ISO h6
bars 3m
ground
h 6
211 kg
0
110 210 - 211.165
2-800
bars-3m
ground
h-6-en
1.600
46113001600
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per DIN EN 10088-3 9/05
hardenable stainless steel
drawn, ground, in 3m bars
diam. 1.60 mm, tolerance ISO h6
bars 3m
ground
h 6
16 kg
0
210 186 - 16.312
1-600
bars-3m
ground
h-6-en
1.800
46103201800
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
drawn, polished, in 3m bars
diam. 1.80 mm, tolerance ISO h8
bars 3m
drawn
h 8
31 kg
0
181 109 - 30.680
1-800
bars-3m
drawn
h-8-en
2.800
46100702800
Chronifer M 17 B
no 1.4112, X90CrMoV18,~AISI 440B
as per DIN EN 10088-3, NFS 94 090
hardenable stainless steel, ESR remelted
RoHS conforme
precisely cold drawn, polished, in coils
diam. 2.80 mm, tolerance ISO fg7
in spools
drawn
fg 7
383 kg
0
120 210 - 29.200|310 124 - 354.100
2-800
in-spools
drawn
fg-7-en
32.000
46113032000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: chamfered,
100% eddy current crack tested cl. 4
diam. 32.00 mm, tolerance ISO h6
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
eind of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 8.10 mm, tolerance ISO h6
bars 3m
ground
h 6
1208 kg
0
270 911 - 308.100|220 119 - 900.000
8-100
bars-3m
ground
h-6-en
10.200
46113010200
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 10.20 mm, tolerance ISO h6
bars 3m
ground
h 6
1075 kg
0
010 911 - 217.200|060 212 - 857.500
10-200
bars-3m
ground
h-6-en
3.800
46113003800
Chronifer M 17 B
no 1.4112, X90CrMoV18,~AISI 440B
as per EN 10088-3, ESR remelted
AMS QQ-S-763F
~ASTM F-899, NF S94 090, ISO 7153-1
hardenable stainless steel
annealed, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl. 4
diam. 3.80 mm, tolerance ISO h6
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 12.20 mm, tolerance ISO h6
bars 3m
ground
h 6
215 kg
0
240 712 - 3.300|100 913 - 211.200
12-200
bars-3m
ground
h-6-en
2.600
46100702600
Chronifer M 17 B
no 1.4112, X90CrMoV18,~AISI 440B
as per DIN EN 10088-3, Bosch F028X50351
hardenable stainless steel, ESR remelted
cold drawn, tensile strength 775-925MPa
in coils of 20-30kg each
diam. 2.60 mm, tolerance ISO fg7
in spools
drawn
fg 7
241 kg
0
270 319 - 241.000
2-600
in-spools
drawn
fg-7-en
35.000
46113035000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NF S94 090, ~ASTM F899-20
~ASTM A276/A276M, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-19
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: chamfered,
ultrasonic inspected EN10308 Tab. 1, Typ 1a
100% eddy current crack tested cl. 4
diam. 35.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 40.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1306 kg
0
280 114 - 227.100|120 522 - 1079.000
40-000
bars-3m
ground
h-6-en
1.500
46103801500
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
hardenable stainless steel
drawn, polished, in 3m bars (+/-10mm)
end of bars: pointed, chamfered
diam. 1.50 mm, tolerance ISO f7
bars 3m
drawn
spec.
0 kg
0
0
1-500
bars-3m
drawn
spec-en
33.000
46113033000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 33.00 mm, tolerance ISO h6
bars 3m
ground
h 6
778 kg
0
290 615 - 778.000
33-000
bars-3m
ground
h-6-en
8.150
46113008150
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished, N5
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 8.15 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
8-150
bars-3m
ground
h-6-en
4.760
46113004760
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per EN 10088-3 12/14, QQ-S-763F
as per NF S94 090, ESR remelted
hardenable stainless steel, RoHS conforme
cold drawn, annealed,ground, polished
stress relieved, in 3m bars (+30/0mm
end of bars: pointed/chamfered,
100% eddy current crack tested Kl. 4
diam. 4.76mm (3/16″), tolerance ISO h6
bars 3m
ground
h 6
764 kg
0
260 619 - 763.880
4-760
bars-3m
ground
h-6-en
3.900
46113003900
Chronifer M 17 B
no 1.4112, X90CrMoV18,~AISI 440B
as per EN 10088-3, ESR remelted
AMS QQ-S-763F
hardenable stainless steel
annealed, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl. 4
diam. 3.90 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
3-900
bars-3m
ground
h-6-en
12.500
46113012500
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 12.50 mm, tolerance ISO h6
bars 3m
ground
h 6
847 kg
0
030 919 - 847.200
12-500
bars-3m
ground
h-6-en
38.000
46113038000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3 12/14, NF S94 090, ~ASTM F899-2′
~ASTM A276-13, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-16
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm),
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 38.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1345 kg
0
050 923 - 1345.000
38-000
bars-3m
ground
h-6-en
1.600
46103101600
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~AISI 440B
as per DIN EN 10088-3
hardenable stainless steel
cold drawn, polished, in 3m bars
diam. 1.60 mm, tolerance ISO h7
bars 3m
drawn
h 7
55 kg
0
080 818 - 54.800
1-600
bars-3m
drawn
h-7-en
45.000
46113045000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3 12/14, NF S94 090,
~ASTM F899-20
~ASTM A276/A276M-17, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-16
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
100% eddy current crack tested cl. 4
diam. 45.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1065 kg
0
010 622 - 1065.200
45-000
bars-3m
ground
h-6-en
42.000
46113042000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3 12/14, NF S94 090,
~ASTM F899-20
~ASTM A276/A276M-17, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-16
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
100% eddy current crack tested cl. 4
diam. 42.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1352 kg
0
240 522 - 1351.700
42-000
bars-3m
ground
h-6-en
31.000
46113031000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: chamfered,
100% eddy current crack tested cl. 4
diam. 32.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
31-000
bars-3m
ground
h-6-en
1.400
46100701400
Chronifer M 17 B
no 1.4112, X90CrMoV18,
as per DIN EN 10088-3, ~AISI 440B
as per NF S94 090
hardenable stainless steel, ESR remelted
cold drawn, polished, in coils
diam. 1.40 mm, tolerance ISO fg7
in spools
drawn
fg 7
298 kg
0
131 223 - 298.000
1-400
in-spools
drawn
fg-7-en
1.100
46100701100
Chronifer M 17 B
no 1.4112, X90CrMoV18,
as per DIN EN 10088-3 12/14, ~AISI 440B
as per NF S94 909
hardenable stainless steel,ESR remelted
cold drawn, polished, in coils
diam. 1.10 mm, tolerance ISO fg7
in spools
drawn
fg 7
297 kg
0
291 123 - 297.000
1-100
in-spools
drawn
fg-7-en
30.000
461130300001
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3 12/14, NFS 94 090, ~ASTM F899
~ASTM A276/A276M-17 ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-16,~UNS S44003
hardenable stainless steel,
ESR remelted, conforme ROHS directive
hartened at ~54 HRC
ground, in 3m bars (+50/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested, cl. 4
diam. 30.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
30-000
bars-3m
ground
h-6-en
19.050
46113019050
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 19.05 mm (3/4”), tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
19-050
bars-3m
ground
h-6-en
36.000
46113036000
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3 12/14, NFS 94 090, ~ASTM F899-20
~ASTM A276/A276M-17 ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-16,~UNS S44003
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+50/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested, cl. 4
diam. 36.00 mm, tolerance 286-2/h6
bars 3m
ground
h 6
1010 kg
0
220 323 - 1010.000
36-000
bars-3m
ground
h-6-en
12.700
46113012700
Chronifer M 17 B
mat.no.1.4112, X90CrMoV18, ~AISI 440B
EN 10088-3, NFS 94 090, ~ASTM F899
~ASTM A276-08, ~ISO 7153-1 Ref R
~AMS QQS 763F, ~ASTM A 959-09
hardenable stainless steel,
ESR remelted, conforme ROHS directive
annealed, ground polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
ultrasonic inspected per DIN EN 10308 Tab. 1
diam. 12.70 mm (1/2”), tolerance ISO 286-2/h6
bars 3m
ground
h 6
843 kg
0
261 022 - 843.000
12-700
bars-3m
ground
h-6-en
1.100
46103201100
Chronifer M 17 B
no 1.4112, X90CrMoV18, ~Aisi 440B
hardenable stainless steel
cold drawn, in 3m bars
diam. 1.10 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
1-100
bars-3m
drawn
h-8-en
2.000
46113002000
Brief description
Designation Klein:
CHRONIFER M-17 B
Class of metals:
Hardenable martensitic stainless steel
with V addition
Material number:
1.4112
Standard EN:
X 90 CrMoV 18, ~ AISI 440 B
Re-melting:
ESR
Machinability:
up to satisfactory
Hardening capability:
up to 58 HRc
Polishing ability:
adapted for mirror polishing
Corrosion resistance:
satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
Distinctive features and main attributes: Chronifer M-17B is, except of the Mo content, equivalent to Aisi 440B, a hardenable, alloyed stainless steel, optimized for high hardness, characterized by good corrosion and abrasion resistance provided the final part has been polished properly (without pores). Due to its higher carbon content, it is superior to Chronifer Labor M-13 (420 Series). For optimum corrosion resistance, the surface must be free of scale and foreign particles and finished parts should be passivated. However, the machinability is limited with high tool wear, whereas corrosion resistance to water and steam is fine once the parts are heat treated (max. hardness 58 HRC) and polished. The annealed execution with ESR process, combined with a tight size tolerance and straight bars helps to improve the machinability of our Chronifer M-17B. Use and application range: this alloy meets the requirement of medical instruments and dental cutting tools such as bone drills, knives and cutlery, punch disks, ball bearings, screw extruders and spray nozzles. It fulfills most parameters of the medical norms ASTM F-899 (only the Mo content of Chronifer M-17B is higher than F-899, but this higher content increases the corrosion resistance of Chronifer M-17B).
