Difficult parts for watch movements (i.e.
axles, gears) and numerous industrials
applications
Law 100 X® ~1095 hardenable Watchmaking alloys bars
Law 100 X® ~1095 is available in stock as bars/rods. The unalloyed, lead free LAW 100 X® ~ 1095 is a new generation watch making steel. It has been developed in collaboration with Carpenter Technologies Corporation, USA. The technique of powder metallurgy used in the production of LAW 100 X carbon steel represents a quantum leap in the production of high quality steel for the precision industry.
Properties of LAW 100 X® ~ 1095 watch making steel
In view of its extremely fine structure the LAW 100 X® could be dispensed with the addition of lead. The watchmaking steel therefore meets today’s environmental requirements. The final hardness (up to approx.64 HRc possible) is comparable to the grades LAW 100Pb and 20 AP, its workability is nearly as good as that of a lead alloyed steel of the old generation. It has a tremendously good wear resistance.
Due to its structure purity the low-distortion LAW 100 X makes an extremely efficient production of small precision parts possible, which have high demands on productivity and polishing ability.
If tolerated by the machines, high speeds are recommended in order to achieve better results. In the reworks such as hardening / tempering, polishing and coating of parts amazing results are achieved with LAW 100 X®. Here the fine structure comes into effect, as there’s no “lead contamination” existing.
Applications of LAW 100 X®
LAW 100 X 1.1268 is used in particular for producing fine precision parts and instruments. Due to its high wear resistance it is ideal for parts that are constantly in motion and thus highly qualified for use in the watch industry. Movement parts such as gears, pinions, pivots, axles, bridges and plates are made from this material.
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted
freecutting high carbon steel
cold drawn, in 2m bars
diam. 0.55 mm, tolerance ISO h4
bars 2m
drawn
spec.
5 kg
0
181 109 - 5.278
0-550
bars-2m
drawn
spec-en
1.400
10403801400
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 3m bars
diam. 1.40 mm, tolerance ISO h5
bars 3m
drawn
spec.
0 kg
0
0
1-400
bars-3m
drawn
spec-en
5.500
10403205500
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
cold drawn, in 3m bars (+30/0mm)
diam. 5.50 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
5-500
bars-3m
drawn
h-8-en
3.000
10403803000
LAW 100 X
no 1.1268, SAE C-1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 3m bars
end of bars: pointed, chamfered
diam. 3.00 mm, tolerance ISO h4
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars
diam. 4.60 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
4-600
bars-3m
drawn
h-8-en
0.900
10400800900
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in coils
diam. 0.90 mm, tolerance ISO fg6
in spools
drawn
spec.
0 kg
0
0
0-900
in-spools
drawn
spec-en
2.500
10403802500
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
made by powder metallurgy
cold drawn, in 3m bars
pointed and chamfered
diam. 2.50 mm, tolerance ISO h4
bars 3m
drawn
spec.
242 kg
0
120 612 - 145.421|170 518 - 96.281
2-500
bars-3m
drawn
spec-en
0.900
10402000900
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted
freecutting high carbon steel
cold drawn, in 2m bars
diam. 0.90 mm, tolerance ISO h6
bars 2m
drawn
h 6
8 kg
0
280 108 - 8.400
0-900
bars-2m
drawn
h-6-en
2.000
10403802000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 3m bars
end of bars: pointed/chamfered
diam. 2.00 mm, tolerance ISO h4
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted structure
cold drawn, in 3m bars
diam. 5.12 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
5-120
bars-3m
drawn
h-9-en
5.630
10403305630
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted structure
cold drawn, in 3m bars
diam. 5.63 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
5-630
bars-3m
drawn
h-9-en
2.000
10402802000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 2m bars
pointed/chamfered
diam. 2.00 mm, tolerance ISO h4
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars
diam. 1.80 mm, tolerance ISO h6
bars 3m
drawn
h 6
0 kg
0
290 108 - 0.380
1-800
bars-3m
drawn
h-6-en
1.500
10403801500
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars (+/-10mm)
pointed and chamfered
diam. 1.50 mm, tolerance ISO h4
bars 3m
drawn
spec.
265 kg
0
140 710 - 37.180|160 610 - 227.400
1-500
bars-3m
drawn
spec-en
2.000
104130020001
no mat. 1.2833
hardenable high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0mm)
pointed, chamfered, crack tested
diam. 2.00 mm, tolerance ISO h6
bars 3m
ground
h 6
56 kg
0
041 109 - 55.902
2-000
bars-3m
ground
h-6-en
1.500
10413101500
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, ground, in 3m bars
diam. 1.50 mm, tolerance ISO h7
bars 3m
ground
h 7
43 kg
0
070 411 - 42.966
1-500
bars-3m
ground
h-7-en
0.400
10400800400
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, on spools
diam. 0.40 mm, tolerance ISO h4
in spools
drawn
spec.
0 kg
0
0
0-400
in-spools
drawn
spec-en
6.100
10413806100
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 6.10 mm, tolerance +/-0.013mm
bars 3m
ground
spec.
504 kg
0
030 323 - 504.000
6-100
bars-3m
ground
spec-en
7.100
10413807100
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% eddycurrent crack tested EC + US
diam. 7.10 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
396 kg
534
240 124 - 396.000
7-100
bars-3m
ground
spec-en
6.000
10413906000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 6.00 mm, tolerance ISO h5
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% eddycurrent crack tested (EC + US)
diam. 7.00 mm, tolerance ISO h5
bars 3m
ground
h 5
407 kg
0
310 315 - 13.391|200 117 - 394.000
7-000
bars-3m
ground
h-5-en
8.000
10413908000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, ground polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% crack tested (EC + US)
diam. 8.00 mm, tolerance ISO h5
bars 3m
ground
h 5
543 kg
0
250 915 - 276.400|271 118 - 266.600
8-000
bars-3m
ground
h-5-en
10.200
10413810200
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 10.20 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
494 kg
0
151 019 - 494.400
10-200
bars-3m
ground
spec-en
3.000
10413903000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
drawn, ground, polished, in 3m bars
diam. 3.00 mm, tolerance ISO h5
bars 3m
ground
h 5
300 kg
0
181 019 - 197.585|260 219 - 102.700
3-000
bars-3m
ground
h-5-en
0.400
10402900400
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
precisely cold drawn, in 2m bars (+/-10mm)
diam. 0.40 mm, tolerance ISO h5
bars 2m
drawn
h 5
1 kg
0
280 108 - 0.686|041 218 - 0.740
0-400
bars-2m
drawn
h-5-en
0.500
10402900500
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 2m bars
diam. 0.50 mm, tolerance ISO h5
bars 2m
drawn
h 5
1 kg
0
280 108 - 1.199
0-500
bars-2m
drawn
h-5-en
4.100
10413904100
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested
diam. 4.10 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
4-100
bars-3m
ground
h-5-en
1.200
10403901200
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
precisely cold drawn, in 3m bars (+/-10mm)
diam. 1.20 mm, tolerance ISO h5
bars 3m
drawn
h 5
1 kg
0
041 218 - 1.450
1-200
bars-3m
drawn
h-5-en
0.600
10402900600
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 2m bars
diam. 0.60 mm, tolerance ISO h5
bars 2m
drawn
h 5
3 kg
0
230 610 - 3.259
0-600
bars-2m
drawn
h-5-en
0.800
10402900800
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 2m bars
diam. 0.80 mm, tolerance ISO h5
bars 2m
drawn
h 5
50 kg
0
280 108 - 50.212
0-800
bars-2m
drawn
h-5-en
0.900
10403900900
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 3m bars
diam. 0.90 mm, tolerance ISO h5
bars 3m
drawn
h 5
24 kg
0
280 108 - 24.040
0-900
bars-3m
drawn
h-5-en
1.000
10402901000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 2m bars
diam. 1.00 mm, tolerance ISO h5
bars 2m
drawn
h 5
38 kg
0
280 108 - 38.190
1-000
bars-2m
drawn
h-5-en
1.000
10403901000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 3m bars
diam. 1.00 mm, tolerance ISO h5
bars 3m
drawn
h 5
54 kg
0
280 108 - 54.132
1-000
bars-3m
drawn
h-5-en
1.100
10403901100
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 3m bars (+/-10mm)
diam. 1.10 mm, tolerance ISO h5
bars 3m
drawn
h 5
27 kg
0
280 108 - 21.829|041 218 - 5.400
1-100
bars-3m
drawn
h-5-en
1.200
10402901200
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted structure
cold drawn, in 2m bars
diam. 1.20 mm, tolerance ISO h5
bars 2m
drawn
h 5
0 kg
0
0
1-200
bars-2m
drawn
h-5-en
1.250
10402901250
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted
freecutting high carbon steel
cold drawn, in 2m bars
diam. 1.25 mm, tolerance ISO h5
bars 2m
drawn
h 5
21 kg
0
181 109 - 20.700
1-250
bars-2m
drawn
h-5-en
1.250
10403901250
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted
freecutting high carbon steel
cold drawn, in 3m bars
diam. 1.25 mm, tolerance ISO h5
bars 3m
drawn
h 5
24 kg
0
181 109 - 24.142
1-250
bars-3m
drawn
h-5-en
1.300
10403901300
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 3m bars
diam. 1.30 mm, tolerance ISO h5
bars 3m
drawn
h 5
18 kg
0
290 108 - 17.639
1-300
bars-3m
drawn
h-5-en
1.300
10402901300
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 2m bars
diam. 1.30 mm, tolerance ISO h5
bars 2m
drawn
h 5
10 kg
0
290 108 - 9.854
1-300
bars-2m
drawn
h-5-en
1.500
10413901500
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0 mm)
diam. 1.50 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
1-500
bars-3m
ground
h-5-en
1.800
10402901800
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 2m bars
diam. 1.80 mm, tolerance ISO h5
bars 2m
drawn
h 5
0 kg
0
0
1-800
bars-2m
drawn
h-5-en
1.800
10403901800
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 3m bars
diam. 1.80 mm, tolerance ISO h5
bars 3m
drawn
h 5
61 kg
0
290 108 - 61.080
1-800
bars-3m
drawn
h-5-en
2.000
10402902000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, polished,
in 2m bars +20/0mm
diam. 2.00 mm, tolerance ISO h5
bars 2m
drawn
h 5
7 kg
0
290 108 - 7.303
2-000
bars-2m
drawn
h-5-en
2.100
10403902100
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars
diam. 2.10 mm, tolerance ISO h5
bars 3m
drawn
h 5
31 kg
0
280 108 - 31.000
2-100
bars-3m
drawn
h-5-en
2.200
10403902200
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars
diam. 2.20 mm, tolerance ISO h5
bars 3m
drawn
h 5
19 kg
0
280 108 - 18.595
2-200
bars-3m
drawn
h-5-en
2.200
104039022001
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars
diam. 2.20 mm, tolerance ISO h5
bars 3m
drawn
h 5
9 kg
0
270 108 - 9.360
2-200
bars-3m
drawn
h-5-en
2.300
10413902300
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0 mm)
pointed, chamfered, crack tested
diam. 2.30 mm, tolerance ISO h5
bars 3m
ground
h 5
229 kg
0
140 812 - 229.100
2-300
bars-3m
ground
h-5-en
2.400
10402902400
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted technology
precisely cold drawn, in 2m bars
diam. 2.40 mm, tolerance ISO h5
bars 2m
drawn
h 5
16 kg
0
280 108 - 2.400|040 309 - 13.356
2-400
bars-2m
drawn
h-5-en
2.400
10403902400
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted technology
precisely cold drawn, in 3m bars
diam. 2.40 mm, tolerance ISO h5
bars 3m
drawn
h 5
0 kg
0
280 108 - 0.086
2-400
bars-3m
drawn
h-5-en
2.400
10412902400
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
by powdermetallurgy process
cold drawn, ground, in 2m bars
diam. 2.40 mm, tolerance ISO h5
bars 2m
ground
h 5
105 kg
0
111 109 - 58.000|020 309 - 46.906
2-400
bars-2m
ground
h-5-en
2.500
10413902500
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0 mm)
pointed, chamfered, crack tested
diam. 2.50 mm, tolerance ISO h5
bars 3m
ground
h 5
276 kg
0
290 112 - 47.901|140 812 - 227.854
2-500
bars-3m
ground
h-5-en
2.600
10403902600
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars
diam. 2.60 mm, tolerance ISO h5
bars 3m
drawn
h 5
41 kg
0
280 108 - 23.400|290 108 - 18.025
2-600
bars-3m
drawn
h-5-en
2.800
10403902800
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 3m bars
diam. 2.80 mm, tolerance ISO h5
bars 3m
drawn
h 5
24 kg
0
280 108 - 13.600|040 309 - 10.500
2-800
bars-3m
drawn
h-5-en
3.000
10403903000
LAW 100 X
no 1.1268, SAE C-1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 3m bars
diam. 3.00 mm, tolerance ISO h5
bars 3m
drawn
h 5
1 kg
0
191 213 - 0.643
3-000
bars-3m
drawn
h-5-en
3.500
10413903500
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
drawn, ground, polished, in 3m bars
end of bars:pointed and chamfered,
100% eddycurrent crack tested
diam. 3.50 mm, tolerance ISO h5
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, in 2m bars
diam. 0.70 mm, tolerance ISO h5
bars 2m
drawn
h 5
3 kg
0
230 610 - 2.828
0-700
bars-2m
drawn
h-5-en
1.730
10400801730
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
cold drawn, in coils
diam. 1.73 mm, tolerance +/-0.02 mm
in spools
drawn
spec.
18 kg
0
160 610 - 18.300
1-730
in-spools
drawn
spec-en
4.000
10413904000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested cl. 4
diam. 4.00 mm, tolerance ISO h5
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested
diam. 4.50 mm, tolerance ISO h5
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished,
in 3m bars (+40/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested
diam. 4.70 mm, tolerance ISO h5
bars 3m
ground
h 5
229 kg
0
020 710 - 228.640
4-700
bars-3m
ground
h-5-en
5.000
10413905000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, ground polished
in 3m bars (+40/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested
diam. 5.00 mm, tolerance ISO h5
bars 3m
ground
h 5
101 kg
0
200 417 - 147.022
5-000
bars-3m
ground
h-5-en
5.200
10413905200
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, ground polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
diam. 5.20 mm, tolerance ISO h5
bars 3m
ground
h 5
238 kg
0
230 610 - 238.000
5-200
bars-3m
ground
h-5-en
5.500
10413905500
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars
diam. 5.50 mm, tolerance ISO h5
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 16.00 mm, tolerance ISO h5
bars 3m
ground
h 5
585 kg
0
191 015 - 129.700|221 117 - 455.000
16-000
bars-3m
ground
h-5-en
2.000
104038020001
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 3m bars
diam. 2.00 mm, tolerance ISO h4
bars 3m
drawn
spec.
102 kg
0
230 610 - 13.830|240 610 - 88.602
2-000
bars-3m
drawn
spec-en
0.500
10400800500
LAW 100 X
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted
cold drawn, on spools
diam. 0.50 mm, tolerance ISO h4
in spools
drawn
spec.
1 kg
0
280 108 - 1.000
0-500
in-spools
drawn
spec-en
10.000
10413910000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 10.00 mm, tolerance ISO h5
bars 3m
ground
h 5
285 kg
0
080 416 - 285.323
10-000
bars-3m
ground
h-5-en
12.000
10413912000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 12.00 mm, tolerance ISO h5
bars 3m
ground
h 5
426 kg
0
080 416 - 426.230
12-000
bars-3m
ground
h-5-en
5.100
10413805100
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 5.10 mm, tolerance +/-0.038mm
bars 3m
ground
spec.
411 kg
0
221 121 - 411.000
5-100
bars-3m
ground
spec-en
11.000
10413911000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 11.00 mm, tolerance ISO h5
bars 3m
ground
h 5
305 kg
0
190 716 - 305.350
11-000
bars-3m
ground
h-5-en
15.000
10413915000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 15.00 mm, tolerance ISO h5
bars 3m
ground
h 5
386 kg
0
191 015 - 4.550|221 117 - 381.600
15-000
bars-3m
ground
h-5-en
0.250
10401800250
LAW 100
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted rawmaterial
cold drawn, in 1.5m bars
diam. 0.25 mm, tolerance +/-0.002mm
special length
drawn
spec.
0 kg
0
0
0-250
special-length
drawn
spec-en
11.200
10413811200
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 11.20 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
1043 kg
0
270 721 - 515.000|281 021 - 528.000
11-200
bars-3m
ground
spec-en
2.000
10413902000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0 mm)
pointed, chamfered, crack tested
diam. 2.00 mm, tolerance ISO h5
bars 3m
ground
h 5
363 kg
0
200 612 - 93.928|170 420 - 269.750
2-000
bars-3m
ground
h-5-en
20.000
10413920000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 20.00 mm, tolerance ISO h5
bars 3m
ground
h 5
358 kg
0
220 217 - 358.383
20-000
bars-3m
ground
h-5-en
25.400
10413825400
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars:pointed, chamfered
100% ultrasonic crack tested
diam. 25.4 mm (1″), tolerance +/-0.060 mm
bars 3m
ground
spec.
320 kg
0
241 017 - 320.400
25-400
bars-3m
ground
spec-en
29.000
10413829000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, precision ground,
tensile strength Rm: 550-750 MPa
in 3m bars (0/-50mm)
end of bars: chamfered
shear wave tested
diam. 29.00 mm, tolerance 0/-0.060 mm
bars 3m
ground
spec.
248 kg
0
051 017 - 248.000
29-000
bars-3m
ground
spec-en
31.750
10413183175
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: chamfered
100% ultrasonic crack tested
diam. 31.75 mm (1 1/4″), tolerance +/-0.033mm
bars 3m
ground
h 7
0 kg
0
0
31-750
bars-3m
ground
h-7-en
31.000
10413831000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: chamfered
shear wave crack tested
diam. 31.00 mm, tolerance +/-0.060 mm
bars 3m
ground
spec.
904 kg
0
190 418 - 904.100
31-000
bars-3m
ground
spec-en
7.500
10413907500
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, ground polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% crack tested (EC + US)
diam. 7.50 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
7-500
bars-3m
ground
h-5-en
2.500
10403902500
LAW 100 X
no 1.1268, SAE C-1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 3m bars
end of bars pointed, chamfered
diam. 2.50 mm, tolerance ISO h5
bars 3m
drawn
h 5
0 kg
0
0
2-500
bars-3m
drawn
h-5-en
5.080
10413805080
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, ground
in 3m bars (+30/0mm)
end of bars: pointed, chamfered, UT tested
diam. 5.08 mm, tolerance +/-0.0127mm
bars 3m
ground
spec.
1431 kg
0
170 119 - 298.000|110 320 - 1133.000
5-080
bars-3m
ground
spec-en
9.000
10413909000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
ultrasonic inspected by shear wave
diam. 9.00 mm, tolerance ISO h5
bars 3m
ground
h 5
538 kg
0
140 317 - 103.700|240 124 - 434.000
9-000
bars-3m
ground
h-5-en
30.000
10413030000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, ground
in 3m bars +30/0 mm
end of bars: chamfered
shear wave crack tested
diam. 30.00 mm, tolerance ISO h6
bars 3m
ground
h 6
320 kg
0
111 017 - 319.987
30-000
bars-3m
ground
h-6-en
2.900
10426802900
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted mothercoil, annealed
cold finish,for re-rolling,
slit-burr max.10 % thickness
in sheets of apprx. 800mm lengths
2.90 +/-0.050mm x 220 mm +/-0.50mm
in sheet
rolled
spec.
13 kg
0
010 517 - 12.700
2-900
in-sheet
rolled
spec-en
10.500
10413910500
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 10.50 mm, tolerance ISO h5
bars 3m
ground
h 5
478 kg
0
260 917 - 478.000
10-500
bars-3m
ground
h-5-en
28.000
10413028000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, precision ground,
tensile strength Rm: 550-750 MPa
in 3m bars (0/-50mm)
end of bars: chamfered, shear wave tested
diam. 28.00 mm, tolerance ISO h6
bars 3m
ground
h 6
232 kg
0
051 017 - 231.500
28-000
bars-3m
ground
h-6-en
18.000
10413918000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 18.00 mm, tolerance ISO h5
bars 3m
ground
h 5
507 kg
0
310 118 - 507.097
18-000
bars-3m
ground
h-5-en
0.600
10402800600
LAW 100
no 1.1268, ~Aisi 1095
freecutting high carbon steel
powder melted rawmaterial
cold drawn, in 2m bars
diam. 0.60 mm, tolerance ISO h4
bars 2m
drawn
spec.
1 kg
0
181 109 - 0.915
0-600
bars-2m
drawn
spec-en
17.000
10413917000
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 17.00 mm, tolerance ISO h5
bars 3m
ground
h 5
421 kg
0
190 418 - 421.200
17-000
bars-3m
ground
h-5-en
25.000
10413025000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0 mm)
end of bars:pointed, chamfered
100% ultrasonic crack tested
diam. 25.00 mm, tolerance ISO h6
bars 3m
ground
h 6
103 kg
0
241 017 - 102.700
25-000
bars-3m
ground
h-6-en
14.000
10413014000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 14.00 mm, tolerance ISO h6
bars 3m
ground
h 6
368 kg
0
170 119 - 368.200
14-000
bars-3m
ground
h-6-en
4.000
10403804000
LAW 100 X
no 1.1268, SAE C-1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
diam. 4.00 mm, tolerance ISO h4
bars 3m
drawn
spec.
101 kg
0
120 718 - 101.246
4-000
bars-3m
drawn
spec-en
9.700
10413809700
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
annealed, cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
ultrasonic inspected by shear wave
diam. 9.70 mm, tolerance +/-0.020 mm
bars 3m
ground
spec.
0 kg
0
0
9-700
bars-3m
ground
spec-en
6.600
10413806600
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
ultrasonic inspected by shear wave
diam. 6.60 mm, tolerance +/-0.013 mm
bars 3m
ground
spec.
634 kg
0
221 121 - 634.000
6-600
bars-3m
ground
spec-en
6.500
10413906500
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 6.50 mm, tolerance ISO h5
bars 3m
ground
h 5
422 kg
0
240 919 - 422.000
6-500
bars-3m
ground
h-5-en
4.650
10403804650
LAW 100 X
mat. no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
cold drawn, in 3m bars (+30/0mm)
end of bars: pointed/chamfered
diam. 4.65 mm, tolerance ISO js9(+/-0.025mm)
bars 3m
drawn
spec.
350 kg
0
270 421 - 350.000
4-650
bars-3m
drawn
spec-en
23.000
10413823000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 2.8m bars
end of bars: chamfered
100% crack inspected
diam. 23.00 mm, tolerance +50/0mm
bars 3m
ground
spec.
170 kg
0
230 320 - 170.000
23-000
bars-3m
ground
spec-en
9.500
10413909500
LAW 100 X
no 1.1268, ~Aisi 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 9.50 mm, tolerance ISO h5
bars 3m
ground
h 5
366 kg
0
170 919 - 365.900
9-500
bars-3m
ground
h-5-en
13.000
10413913000
LAW 100 X
no. 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 13.00 mm, tolerance ISO h5
bars 3m
ground
h 5
409 kg
0
240 919 - 408.950
13-000
bars-3m
ground
h-5-en
22.000
10413822000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: chamfered
100% crack inspected
diam. 22.00 mm, tolerance +50/0mm
bars 3m
ground
spec.
0 kg
0
0
22-000
bars-3m
ground
spec-en
22.000
10411022000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 2.67m bars
end of bars: chamfered
100% crack inspected
diam. 22.00 mm, tolerance ISO h6
special length
ground
h 6
102 kg
0
250 320 - 101.850
22-000
special-length
ground
h-6-en
21.000
10413021000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% crack tested
diam. 21.00 mm, tolerance ISO h6
bars 3m
ground
h 6
350 kg
0
300 620 - 349.500
21-000
bars-3m
ground
h-6-en
8.650
10413808650
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% crack tested (EC + US)
diam. 8.65 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
0 kg
0
0
8-650
bars-3m
ground
spec-en
1.700
10403801700
LAW 100 X
no. 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars (+/-10mm)
pointed and chamfered
diam. 1.70 mm, tolerance ISO h4
bars 3m
drawn
spec.
27 kg
0
260 219 - 26.800
1-700
bars-3m
drawn
spec-en
1.900
10403801900
LAW 100 X
no. 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars (+/-10mm)
pointed and chamfered
diam. 1.90 mm, tolerance ISO h4
bars 3m
drawn
spec.
32 kg
0
260 219 - 31.633
1-900
bars-3m
drawn
spec-en
1.600
10403801600
LAW 100 X
no. 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars (+/-10mm)
pointed and chamfered
diam. 1.60 mm, tolerance ISO h4
bars 3m
drawn
spec.
48 kg
0
260 219 - 48.400
1-600
bars-3m
drawn
spec-en
1.500
104038015001
LAW 100 X
no. 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
cold drawn, in 3m bars (+/-10mm)
pointed and chamfered
diam. 1.50 mm, tolerance ISO h4
bars 3m
drawn
spec.
36 kg
0
260 219 - 35.658
1-500
bars-3m
drawn
spec-en
1.150
10403901150
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
precisely cold drawn, in 3m bars (+/-10mm)
diam. 1.15 mm, tolerance ISO h5
bars 3m
drawn
h 5
2 kg
0
041 218 - 2.350
1-150
bars-3m
drawn
h-5-en
0.950
10403900950
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 3m bars (+/-10mm)
diam. 0.95 mm, tolerance ISO h5
bars 3m
drawn
h 5
5 kg
0
041 218 - 5.120
0-950
bars-3m
drawn
h-5-en
0.650
10402900650
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 2m bars (+/-10mm)
diam. 0.65 mm, tolerance ISO h5
bars 2m
drawn
h 5
1 kg
0
041 218 - 0.995
0-650
bars-2m
drawn
h-5-en
0.750
10402900750
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 2m bars (+/-10mm)
diam. 0.75 mm, tolerance ISO h5
bars 2m
drawn
h 5
3 kg
0
041 218 - 3.000
0-750
bars-2m
drawn
h-5-en
0.850
10402900850
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 2m bars (+/-10mm)
diam. 0.85 mm, tolerance ISO h5
bars 2m
drawn
h 5
4 kg
0
041 218 - 4.240
0-850
bars-2m
drawn
h-5-en
0.450
10402900450
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 2m bars (+/-10mm)
diam. 0.45 mm, tolerance ISO h5
bars 2m
drawn
h 5
1 kg
0
041 218 - 1.022
0-450
bars-2m
drawn
h-5-en
0.350
10400000350
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel,powder melted
drawn, with spheroidisation annealing
on spool SH 390 K
diam. 0.35 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
0-350
in-spools
drawn
h-6-en
0.350
10402900350
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 2m bars (+/-10mm)
diam. 0.35 mm, tolerance ISO h5
bars 2m
drawn
h 5
1 kg
0
041 218 - 1.281
0-350
bars-2m
drawn
h-5-en
0.250
10400000250
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel,powder melted
cold drawn, on spool SH 390 K
diam. 0.25 mm, tolerance ISO h6
in spools
drawn
h 6
1 kg
0
041 218 - 0.500
0-250
in-spools
drawn
h-6-en
0.300
10400000300
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel,powder melted
cold drawn, on spool SH 390 K
diam. 0.30 mm, tolerance ISO h6
in spools
drawn
h 6
1 kg
0
041 218 - 0.578
0-300
in-spools
drawn
h-6-en
0.300
10401900300
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 1m bars (+/-10mm)
diam. 0.30 mm, tolerance ISO h5
special length
drawn
h 5
0 kg
0
041 218 - 0.470
0-300
special-length
drawn
h-5-en
0.250
10401900250
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
precisely cold drawn, in 1m bars (+/-10mm)
diam. 0.25 mm, tolerance ISO h5
special length
drawn
h 5
0 kg
0
041 218 - 0.490
0-250
special-length
drawn
h-5-en
3.950
10413903950
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested
diam. 3.95 mm, tolerance ISO h5
bars 3m
ground
h 5
15 kg
0
300 512 - 14.800
3-950
bars-3m
ground
h-5-en
5.350
10413905350
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
cold drawn, ground, in 3m bars
diam. 5.35 mm, tolerance ISO h5
bars 3m
ground
h 5
4 kg
0
281 107 - 3.700
5-350
bars-3m
ground
h-5-en
5.150
10413905150
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
cold drawn, in 3m bars (+30/0mm)
diam. 5.35 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
5-150
bars-3m
ground
h-5-en
5.450
10413905450
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
cold drawn, ground, in 3m bars
diam. 5.45 mm, tolerance ISO h5
bars 3m
ground
h 5
4 kg
0
281 107 - 3.800
5-450
bars-3m
ground
h-5-en
5.250
10413905250
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted structure
cold drawn, ground, in 3m bars
diam. 5.25 mm, tolerance ISO h5
bars 3m
ground
h 5
6 kg
0
281 107 - 5.600
5-250
bars-3m
ground
h-5-en
24.000
10413824000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
annealed,cold workded, precision ground,
in 3m bars +30/0 mm
end of bars: chamfered
100% ultrasonic crack tested
diam. 24.00 mm, tolerance 0/-0.050 mm
bars 3m
ground
spec.
483 kg
0
081 221 - 483.000
24-000
bars-3m
ground
spec-en
26.000
10413826000
LAW 100 X
no 1.1268, ~AISI 1095, REV 8
powder melted (micro-melt)
freecutting high carbon steel
annealede, cold worked, precision ground,
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
100% ultrasonic crack tested
diam. 26.00 mm, tolerance +/-0.063 mm
bars 3m
ground
spec.
0 kg
526
0
26-000
bars-3m
ground
spec-en
27.000
10413827000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
annealede, cold worked, precision ground,
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
100% ultrasonic crack tested
diam. 27.00 mm, tolerance +/-0.063 mm
bars 3m
ground
spec.
474 kg
0
070 823 - 400.000|130 224 - 74.000
27-000
bars-3m
ground
spec-en
38.100
10413838100
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% ultrasonic crack tested
diam. 38.10 mm(1 1/2″), tolerance +/-0.038 mm
bars 3m
ground
spec.
0 kg
780
0
38-100
bars-3m
ground
spec-en
1.400
10402901400
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, in 2m bars (+/-10mm)
diam. 1.40 mm, tolerance ISO h5
bars 2m
drawn
h 5
0 kg
0
0
1-400
bars-2m
drawn
h-5-en
42.000
10413842000
LAW 100 X
no 1.1268, ~AISI 1095
powder melted (micro-melt)
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% ultrasonic crack tested
diam. 42.00 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
0 kg
1090
0
42-000
bars-3m
ground
spec-en
7.700
10413807700
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
ultrasonic inspected by shear wave
diam. 7.70 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
0 kg
0
0
7-700
bars-3m
ground
spec-en
5.700
10413805700
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 5.70 mm, tolerance +/-0.013mm
bars 3m
ground
spec.
0 kg
0
0
5-700
bars-3m
ground
spec-en
1.000
10400001000
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel (micro melt)
powder melted
precosely cold drawn, on spools SH 390K
diam. 1.00 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-000
in-spools
drawn
h-6-en
4.140
10413804140
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 4.14 mm, tolerance +/-0.013mm
bars 3m
ground
spec.
0 kg
0
0
4-140
bars-3m
ground
spec-en
2.000
10400602000
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
by powdermetallurgy process
cold drawn, in coils
diam. 2.00 mm, tolerance ISO fg6
in spools
drawn
fg 6
0 kg
0
0
2-000
in-spools
drawn
fg-6-en
4.800
10413904800
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested
diam. 4.80 mm, tolerance ISO h5
bars 3m
ground
h 5
9 kg
0
200 417 - 9.300
4-800
bars-3m
ground
h-5-en
1.600
10403001600
Brief description
Klein designation:
LAW 100 X
Class of metals:
Watch making steel
with additions of S
Production technology:
Micro-Melt® powder metallurgy
Material number:
1.1268 X
Standard AISI:
~ 1095
Melting:
VIM + Micro-Melt
Machinability:
good
Hardening capability:
up to 64 HRc
Polishing ability:
good to very good
Magnetism:
ferromagnetic
Uses:
Difficult parts for watch movements (i.e.
axles, gears) and numerous industrials
applications
Law 100 X® ~1095 hardenable Watchmaking alloys bars
Law 100 X® ~1095 is available in stock as bars/rods. The unalloyed, lead free LAW 100 X® ~ 1095 is a new generation watch making steel. It has been developed in collaboration with Carpenter Technologies Corporation, USA. The technique of powder metallurgy used in the production of LAW 100 X carbon steel represents a quantum leap in the production of high quality steel for the precision industry.
Properties of LAW 100 X® ~ 1095 watch making steel
In view of its extremely fine structure the LAW 100 X® could be dispensed with the addition of lead. The watchmaking steel therefore meets today’s environmental requirements. The final hardness (up to approx.64 HRc possible) is comparable to the grades LAW 100Pb and 20 AP, its workability is nearly as good as that of a lead alloyed steel of the old generation. It has a tremendously good wear resistance.
Due to its structure purity the low-distortion LAW 100 X makes an extremely efficient production of small precision parts possible, which have high demands on productivity and polishing ability.
If tolerated by the machines, high speeds are recommended in order to achieve better results. In the reworks such as hardening / tempering, polishing and coating of parts amazing results are achieved with LAW 100 X®. Here the fine structure comes into effect, as there’s no “lead contamination” existing.
Applications of LAW 100 X®
LAW 100 X 1.1268 is used in particular for producing fine precision parts and instruments. Due to its high wear resistance it is ideal for parts that are constantly in motion and thus highly qualified for use in the watch industry. Movement parts such as gears, pinions, pivots, axles, bridges and plates are made from this material.
bars 3m
drawn
h 6
42 kg
0
140 905 - 42.063
1-600
bars-3m
drawn
h-6-en
4.650
10413804650
LAW 100 X
no 1.1268, ~AISI 1095
powder melted rawmaterial
freecutting high carbon steel
cold drawn, precision ground,
in 3m bars +30/0 mm
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 4.65 mm, tolerance +/-0.013mm
bars 3m
ground
spec.
0 kg
889
0
4-650
bars-3m
ground
spec-en
3.505
10403803505
LAW 100 X
no 1.1268, ~AISI 1095
freecutting high carbon steel
by powdermetallurgy process
cold drawn, in 3m bars (+25.4/0mm)
end of bars: pointed/chamfered
diam. 3.505 mm, tolerance +/-0.0254mm
