satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
UNS S46500 / Chronifer 465 KL, as per ASTM F 899, martensitic precipitation age hardenable Stainless Steel for Medical Instruments bars
Custom 465 is available in stock as bars/rods. Chronifer 465 KL, steel for medical instruments, is a product of Carpenter steel under the protected brand name Custom 465. The norm ASTM F-899 has already added this high tech steel under UNS S46500.
Properties of Custom 465 / UNS S46500
With the Custom 465 the very good properties of Custom 455 were further improved. The premium melted martensitic, age-hardenable steel, has a capablility of ultimate tensile strength of over 1700 MPa (250ksi) in the overaged condition H 900. His toughness is significantly higher than that of other precipitation-steels and its notch tensile strength is low. Custom 465 has a good combination of fracture strength and resistance to pitting corrosion. Its corrosion resistance is nearly like that of an austenitic steel (18-8 steel, AISI 304, 1.4301).
Applications of Custom 465 / 1.4614
This alloy is designed for applications in the field of excellent notch tensile strength and fracture toughness for medical instruments.
Custom 465 meets the high demands on materials, that are required in the medical technology. It is used for the production of endoscopic instruments for surgery and for dental instruments, needles, needle wires and other instruments with small diameters.
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-04, AMS 5936
high tech medical Chrome-steel
annealed, cold worked, ground
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
diam. 3.50mm, tolerance ISO h8
bars 3m
ground
h 8
436 kg
0
171 210 - 436.173
3-500
bars-3m
ground
h-8-en
19.050
51511819050
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev.D
Stryker HMS 4553 Cap. of H1000 Rev. 9 exept.
ltr (12/14/20), Medtronic MSD-MS-110 Cap of H1000 (S46500) Rev. d 12/20/17
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed ground, in ca. 3.65m lengths
end of bars chamfered, marked
100% ultrasonic inspected at finished bar
diam. 19.05 mm (3/4″), tolerance +/-0.025 mm
special length
ground
spec.
437 kg
0
060 224 - 437.000
19-050
special-length
ground
spec-en
9.520
51511809520
Chronifer M-465 KL Co < 0.1%
Custom 465, gemäss ASTM F-899-20
ASTM A564/A564M-19A CAP OF H1000 (S46500), AMS 5936 Rev. D, Stryker HMS 4553
CAP OF H1000, Rev. 9, Medtronic
MSD-MS-110 Rev. D, W.Nr. 1.4614, VIM/VAR
mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, ground
in lengths of 3 - 3.65 m
Dia. 9.52 mm (3/8") +/-0.038mm
special length
ground
spec.
804 kg
0
290 923 - 804.000
9-520
special-length
ground
spec-en
25.400
51511825400
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev.D
~mat. no. 1.4614, VIM/VAR remelted
Medtronic MSD-MS-110 cap. H1000
Stryker HMS 4553, cap. of H1000
high tech medical Chrome-steel
solution annealed
ground, in apprx. 3.65 m bars
diam. 25.40 mm (1″), tolerance +/-0.03 mm
special length
ground
spec.
690 kg
0
230 523 - 690.400
25-400
special-length
ground
spec-en
12.700
51511812700
Chronifer M-465 KL
Custom 465, gemäss ASTM F-899-20
ASTM A564-/A564M-19A, AMS 5936 Rev. D (03/01/19) (S46500) Stryker HMS CAP OF H1000
Rev. 9 (12/18/14) Medtronic MSD-MS-110 CAP
H1000 Rev. D (12/20/17)
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, ground
in lengths of 3.65 m (144″)
diam. 12.70 mm, (1/2″) +/-0.050 mm
special length
ground
spec.
619 kg
0
290 923 - 619.000
12-700
special-length
ground
spec-en
7.930
51511807930
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M, AMS 5936 rev.C
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed (cond.A), cold worked, ground
in lengths of 3 – 3.65 m
Dia. 7.93 mm (5/16″) +/-0.038mm
special length
ground
spec.
397 kg
0
290 923 - 171.000|280 923 - 226.000
7-930
special-length
ground
spec-en
15.870
51511815870
Chronifer M-465 KL, 1.4614
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A
ultrasonic inspected per AMS 5936 rev.D
Striker HMS 4553 Rev. 9
Medtronic MSD-MS-110 Rev. D
VIM/VAR remelted high tech medical Chrome-steel
annealed, cold worked, ground
in lengths of ~ 3.65 m
Dia. 15.87 mm (5/8″) +/-0.0127mm
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-04, AMS 5936
high tech medical Chrome-steel
cold worked, precision ground polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
diam. 4.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899
AMS 5936, ASTM A564/A564M-19A, UNS S46500)
high tech medical Chrome-steel
cond. A, cold worked, precision ground
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
diam. 5.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/564M-19,
UNS S46500, AMS 5936 rev. D
high tech medical Chrome-steel
cold worked, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
Dia. 6.00 mm, tolerance ISO h8
bars 3m
ground
h 8
740 kg
0
281 123 - 740.432
6-000
bars-3m
ground
h-8-en
7.000
51513107000
Chronifer 465 KL
Custom 465, as per ASTM F-899-12b
ASTM A564-13, AMS 5936 rev.C
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cond. A, cold worked, ground,
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested,
ultrasonic tested per AMS2630 A, Rev.C
diam. 7.00 mm, tolerance ISO h7
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, ground
in lengths of 3.65 m
diam. 11.11 mm (7/16″) +/-0.038 mm
special length
ground
spec.
280 kg
0
160 810 - 27.400|171 210 - 253.000
11-110
special-length
ground
spec-en
10.000
51513110000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, (S46500), AMS 5936 rev.D
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, cold drawn, ground,
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic inspected per MIL-STD-2154A
diam. 10.00 mm, tolerance ISO h7
Chronifer M-465 KL
Custom 465, as per ASTM F-899-12B
ASTM A564, UNS S 46500, AMS 5936 rev. C
mat. no. ~1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, precision ground
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic inspected per AMS2630A, Rev. D
diam. 12.00 mm, tolerance ISO h7
Chronifer M-465 KL
Custom 465, ASTM F-899-20, UNS S46500
ASTM A564/A564M-19A, AMS 5936 rev. D
~W.Nr. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic inspected as per AMS2630A, Rev. D
diam. 15.00 mm, tolerance ISO h7
bars 3m
ground
h 7
1039 kg
1266
141 222 - 164.890|280 224 - 1174.000
15-000
bars-3m
ground
h-7-en
20.000
51513120000
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564/564M, AMS 5936 rev C
high tech medical Chrome-steel
solution annealed (cond. A), precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
ultrasonic inspected per AMS 2630 Cl. A Rev. C
diam. 20.00 mm, tolerance ISO h7
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20 (UNS S46500)
ASTM A564/A568M-19A, AMS 5936D, class A
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested AMS 5936D,cl.A
diam. 30.00 mm, tolerance ISO h7
bars 3m
ground
h 7
914 kg
1400
201 211 - 170.400|100 622 - 744.000
30-000
bars-3m
ground
h-7-en
63.500
51511863500
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, ground
in lengths of 3 – 3.65 m
Dia. 63.50 mm (2.5″) 0/-0.072 mm
special length
ground
spec.
0 kg
0
0
63-500
special-length
ground
spec-en
4.500
51513204500
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 Rev.C
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, precision ground
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
diam. 4.50 mm, tolerance ISO h8
bars 3m
ground
h 8
611 kg
0
211 011 - 185.750|280 224 - 425.000
4-500
bars-3m
ground
h-8-en
5.500
51513205500
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-04, AMS 5936, Rev. C
high tech medical Chrome-steel
cold worked, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
Dia. 5.50 mm, tolerance ISO h8
bars 3m
ground
h 8
332 kg
0
301 111 - 331.780
5-500
bars-3m
ground
h-8-en
7.930
51513107930
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564/A564M, AMS 5936 rev.C
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, ground
in bars of 3m lengths (+25.4/0mm)
end of bars: pointed, chamfered, crack tested
Dia. 7.93 mm (5/16″) tolerance ISO h7
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564, AMS 5936 Rev. C
~W.Nr. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, ground
in bars of 3m (118”) lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested
Dia. 9.53 mm (3/8″, 0.375”), tolerance ISO h8
CHRONIFER 465 KL
Custom 465, gem. ASTM F-899-20; UNS S46500
ASTM A564/A564M-19A AMS 5936 rev. D 19
(~W.Nr. 1.4614), VIM/VAR, melted
AMS 2630 Class A, Rev. D 2018, DIN 10204 3.1
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m (118”) lengths (+30/0mm)
end of bars: pointed, chamfered
eddycurrent and ultrasonic crack tested
diam. 15.87 mm (5/8″), tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 Rev. D
~ no mat. 1.4614, UNS S46500
high tech medical Chrome-steel
solution annealed, precision, ground
in 3m bars (+30/0mm), end of bars: chamfered
100% eddycurrent crack tested
ultrasonic inspected per AMS2630A Rev.D
diam. 19.05 mm (3/4″), tolerance +/- 0.015 mm
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A (S46500), AMS 5936
high tech medical Chrome-steel, VIM/VAR
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered
100% eddycurrent crack tested
ultrasonic inspected per AMS 2630A, Rev. C
Dia. 31.75 mm (1 1/4″), tolerance 0/-0.030mm
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 Rev. D
Safran Landing System MTL-1304 Issue 2, BMS 7-364 Rev. A, Cl. A, Safran Landing Systems SREQ-SLS-001
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered
ultrasonic crack tested as per
AMS-STD-2154 Rev E, cl. AA
Dia. 50.80 mm (2″) tolerance ISO h8
bars 3m
ground
h 8
1747 kg
0
300 323 - 474.000|260 624 - 1273.000
50-800
bars-3m
ground
h-8-en
12.700
51513112700
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564/A564M, UNS S46500,
AMS 5936 rev. C
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic crack inspected AMS 2630A, Rev.C
Dia. 12.70 mm (1/2″), tolerance ISO h7
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-04, AMS 5936
high tech medical Chrome-steel
solution annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed, chamfered
ultrasonic inspected per AMS 2630 Cl. A Rev. C
Dia. 14.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-04, AMS 5936
high tech medical Chrome-steel
RoHS (Reach) conforme
annealed, cold worked, ground
in bars of 3m lengths (+30/0mm)
diam. 3.00mm, tolerance ISO h8
bars 3m
ground
h 8
321 kg
0
151 211 - 321.295
3-000
bars-3m
ground
h-8-en
3.175
51513203175
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-04, AMS 5936
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, ground, in 3m bars (+30/0mm)
end of bars: pointed and chamfered
diam. 3.175 mm (1/8″), tolerance ISO h8
bars 3m
ground
h 8
652 kg
0
120 612 - 161.675|160 113 - 490.450
3-175
bars-3m
ground
h-8-en
16.000
51513216000
Chronifer M-465 KL
Custom 465, gemäss ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev. D
~no. 1.4614, UNS S46500, VIM/VAR remelted
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent +US crack tested
as per AMS 2630 class AA, Rev. E
diam. 16.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
high tech medical Chrome-steel
annealed, cold worked, ground
in 3m bars (+30/0mm)
diam. 2.50 mm, tolerance ISO h8
bars 3m
ground
h 8
213 kg
0
280 812 - 212.822
2-500
bars-3m
ground
h-8-en
35.000
51513235000
Chronifer M-465 KL
Custom 465, ASTM F-899-20, UNS S46500
ASTM A564/A564M-19A, AMS 5936 rev. D
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630A Rev. D
Dia. 35.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564/A564M, AMS 5936C
German no. ~1.4614, VIM/VAR remelted
high tech medical Chrome-Steel
solutions annealed (cond. A), ground,
in 3m bars (+30/0mm), end of bars: chamfered
100% eddycurrent crack tested
ultrasonic inspected per AMS 2630A, Rev. C
diam. 40.00 mm, tolérance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed (cond. A)
in coils of max 226kg, coil ID 450 mm min.
diam. 1.57 mm, tolerance +/- 0.025 mm
in spools
drawn
spec.
462 kg
0
080 114 - 462.000
1-570
in-spools
drawn
spec-en
1.500
51503001500
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, polished
in 3m bars (+30/0mm)
diam. 1.50 mm, tolerance ISO h6
bars 3m
drawn
h 6
25 kg
0
080 114 - 24.708
1-500
bars-3m
drawn
h-6-en
1.500
51500601500
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, polished
in coils of apprx. 25kg
Dia. 1.50 mm, tolerance ISO fg6
in spools
drawn
fg 6
26 kg
0
080 114 - 26.400
1-500
in-spools
drawn
fg-6-en
6.000
51513106000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-12B
ASTM A564-13, AMS 5936 Rev. C
AMS 2630 class A rev C (01/10)
high tech medical Chrome-steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
diam. 6.00 mm, tolerance ISO h7
bars 3m
ground
h 7
1542 kg
0
241 114 - 23.225|260 324 - 1518.600
6-000
bars-3m
ground
h-7-en
9.000
51513209000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-12B
ASTM A564-13, AMS 5936 Rev.C
~mat. no 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
100% ultrasonic crack tested
as per AMS2630 class A, Rev.C
Dia. 9.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899-12B
ASTM A564-13, AMS 5936 rev.C
AMS 2630 class A rec C (01/10)
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic tested per AMS2630A, Rev.C
Dia. 11.00 mm, tolerance ISO h7
bars 3m
ground
h 7
2068 kg
0
171 114 - 454.800|230 124 - 1613.000
11-000
bars-3m
ground
h-7-en
18.000
51513218000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev D
AMS 2630 class AA rev E (01/10), UNS S46500
mat. no. ~1.4614, VIM/VAR remelted
high tech medical Chrome-steel, RoHS conform
solution annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent +US crack tested
diam. 18.00 mm, tolerance ISO h8
bars 3m
ground
h 8
1238 kg
1472
260 324 - 1243.900
18-000
bars-3m
ground
h-8-en
22.000
51513122000
Chronifer M-465 KL
Custom 465, as per ASTM F-89912B
ASTM A564/A564M-13 (UNS S46500),
AMS 5936 rev C,
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent +US crack tested
ultrasonic crack tested AMS2630,cl.A
Dia. 22.00 mm, tolerance ISO h7
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/564M-19A, AMS 5936 rev D
AMS2603 class A, rev C (01/10) UNS S46500
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent +US crack tested
Dia. 23.00 mm, tolerance ISO h7
bars 3m
ground
h 7
1820 kg
0
021 122 - 310.300|260 224 - 1510.000
23-000
bars-3m
ground
h-7-en
28.000
51513228000
Chronifer M-465 KL
Custom 465, as per ASTM F-89912B
ASTM A564-13, AMS 5936 rev C
AMS2603 class A, rev C (01/10)
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent +US crack tested
Dia. 28.00 mm, tolerance ISO h8
bars 3m
ground
h 8
201 kg
0
281 014 - 200.800
28-000
bars-3m
ground
h-8-en
45.000
51513245000
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564, AMS 5936C
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered
100% eddycurrent and ultrasonic crack tested
Dia. 45.00 mm, tolérance ISO h8
bars 3m
ground
h 8
0 kg
0
0
45-000
bars-3m
ground
h-8-en
107.950
51553810795
Chronifer M-465 KL
Custom 465, gemäss AMS 5936 Rev. D
AMS 564/564M-19A (S46500)
capable cond. H950, H1000
AMS-STD-2154 Type I, Class A, Rev. A
Boeing Aerospace CO BMS 7-364 Cl. A Rev.A
Safran Landing Systems SREQ-SLS-001
BSS 7025 (1994),
high tech medical and Aeronautical Chrome-steel
solution annealed, fine turned
in lengths of 3 – 4m
Dia. 107.95mm (4.25”) + 0.787/0 mm
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-10, AMS 5936
high tech medical Chrome-steel
cold worked, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent and US crack tested
Dia. 13.00 mm, tolerance ISO h8
bars 3m
ground
h 8
995 kg
0
131 115 - 234.500|220 923 - 760.000
13-000
bars-3m
ground
h-8-en
14.200
51513114200
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-04, AMS 5936 rev C
German no 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic inspected as per AMS 2630A
diam. 14.20 mm, tolerance ISO h7
bars 3m
ground
h 7
374 kg
0
200 116 - 56.100|020 717 - 317.500
14-200
bars-3m
ground
h-7-en
38.100
51513238100
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564, AMS 5936C
mat. no 1.4614 VIM/VAR remelted
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered
eddycurrent and ultrasonic crack tested
Dia. 38.10 mm (1 1/2″), tolerance ISO h8
bars 3m
ground
h 8
1909 kg
0
290 323 - 1141.000|221 123 - 768.000
38-100
bars-3m
ground
h-8-en
44.700
51511844700
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, ground
in lengths of 3.65 m
Dia. 44.7 mm tolerance +0.152/0mm
special length
ground
spec.
0 kg
0
0
44-700
special-length
ground
spec-en
88.900
51511888900
Chronifer M-465 KL
Custom 465, AMS 5936 capable of H1000
Revision C, reaffirmed 10/12, AMS 5936
capable of H950 Rev. C reaffirmed 10/12
Boeing Aerospace CO BSS 7025 /07/12/94)
Boeing Aerospace CO BMS 7-364 Cap of H950/H1000, Rev. A
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, smooth turned
in lengths of 4.2 – 5.0m
ultrasonic tested as per AMS-STD-2154
Type I, Class A, , Rev. C
diam. 88.90 mm (3.5″), tolerance 0/+0.787 mm
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M, AMS 5936 Rev. D
high tech medical Chrome-Steel
solution annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630A Rev. D
Dia. 36.00 mm, tolérance ISO h8
bars 3m
ground
h 8
3141 kg
0
200 422 - 1612.500|170 924 - 1528.000
36-000
bars-3m
ground
h-8-en
8.000
51513008000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-12B
ASTM A564-13, AMS 5936 Rev.C
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
drawn, ground, in 3m bars
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic crack tested AMS2630, cl.A
diam. 8.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
8-000
bars-3m
ground
h-6-en
70.000
51513370000
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564/A564M
AMS 5936 Rev. D, UNS S46500
~no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
100% eddycurrent crack tested
100% ultrasonic crack tested (AMS2630A,Rev.D)
diam. 70.00 mm, tolerance ISO h9
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 Rev.E
~german no. ~1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, precision ground
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic crack tested AMS2630A, Rev. E
Diam. 8.50mm, tolerance ISO h8
bars 3m
ground
h 8
1496 kg
0
140 524 - 1496.000
8-500
bars-3m
ground
h-8-en
63.500
51513863500
Chronifer M-465 KL
Custom 465, gemäss ASTM F-899-20
ASTM A564/A564M-19A, (UNS S46500)
AMS 5936 rev. D, AMS-STD-2154 REV E 2021,
Type 1, Class AA
BMS 7-364 REV A 2006 Class A
~ mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, ground
in lengths of 3m (+30/0mm)
ultrasonic inspected (AMS 2630AA, Rev. D)
Dia. 63.50 mm (2.5″) 0/-0.040 mm
bars 3m
ground
spec.
1475 kg
1636
220 722 - 1475.300
63-500
bars-3m
ground
spec-en
17.000
51513217000
Chronifer M-465 KL
as per ASTM F-899-20,AMS 5936 rev. D
ASTM A564/A564M-19A (S46500)
as per AMS 2630 class AA, rev. E (08/18)
mat. no. ~1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, ground, in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent +US crack tested
diam. 17.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, ASTM A564/A564M-19A,
UNS S46500, AMS 5936 Rev. D
Safran landing System MTL-1304 Issue 2 2018
BMS 7-364 Rev. A, May 2006, Class A
Safran landing Systems SREQ-SLS-001 Issue 002/17
~no. 1.4614, VIM/VAR remelted
high tech Chrome-steel
annealed, ground, in 3m bars (+30/0mm)
ultrasonid inspected per AMS-STD 2154 Rev. D 21
Type 1, Klasse AA
diam. 80.00 mm, tolerance ISO h9
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-13 (S46500),
AMS 5936 Rev. D, AMS2630A, Rev. D
~german no 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered
100% eddycurrent crack tested
100% ultrasonic crack tested
Dia. 57.15 mm (2 1/4″) tolerance ISO h9
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A (UNS S46500),
AMS 5936A Rev D,
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed (cond. A), precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested plus
ultrasonic crack tested AMS2630A, Rev.E
Dia. 21.00 mm, tolerance ISO h7
bars 3m
ground
h 7
1273 kg
0
260 224 - 1272.600
21-000
bars-3m
ground
h-7-en
60.000
51513260000
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564/A564M, AMS 5936 Rev. D
(UNS 46500, ~german no 1.4614)
high tech medical Chrome-steel (VIM/VAR)
also for landing gear Systems
solution annealed (cond.A), precision ground
in bars of 3m lengths (+30/0mm)
100% eddycurrent crack tested
100% ultrasonic crack tested AMS2630C Rev.D
Dia. 60.00 mm, tolerance ISO h8
Chronifer M-465 KL
Custom 465, as per ASTM F-899-12B
AMS 5936 rev C
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, precision ground
in bars of 3.58m lengths
ultrsonically inspected per immersion method
Dia. 28.00 mm, tolerance +/- 0.030 mm
special length
ground
spec.
388 kg
0
110 220 - 387.700
28-000
special-length
ground
spec-en
26.000
51513226000
Chronifer M-465 KL
Custom 465 (S46500), ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 Rev. D
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630A Rev. D
Dia. 26.00 mm, tolérance ISO h8
bars 3m
ground
h 8
1880 kg
0
200 721 - 435.000|091 023 - 1445.000
26-000
bars-3m
ground
h-8-en
27.000
51513227000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 Rev. D
~No mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630AA, Rev. D
Dia. 27.00 mm, tolérance ISO h8
bars 3m
ground
h 8
724 kg
0
200 721 - 724.000
27-000
bars-3m
ground
h-8-en
75.000
51513375000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A,
AMS 5936 Rev. D, UNS S46500
~German no 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered
100% eddycurrent crack tested
100% ultrasonic crack tested (AMS2630A,Rev.D)
Dia. 75.00 mm, tolerance +/-0.08mm
Chronifer M-465 KL
Custom 465, as per ASTM F-899-11
ASTM A564-10, AMS 5936 rev.C
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold drawn, ground, in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested,
ultrasonic tested per AMS2630 A, Rev.C
diam. 6.50 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
6-500
bars-3m
ground
h-6-en
6.500
51511806500
Chronifer M-465 KL
Custom 465, as per ASTM F-899-12B
ASTM A564-13, AMS 5936 rev. D
Stryker HMS 4553 Cap of H1000 Rev. 9 (ex.ltr)
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, ground
in lengths of 3.5m (0/-30mm),
ultrasonic inspected at immerson method
end of bars: pointed, chamfered
Dia. 6.50 mm, tolerance ISO h9
special length
ground
spec.
565 kg
0
150 421 - 564.600
6-500
special-length
ground
spec-en
8.100
51513208100
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, (S46500),
as per AMS 5936 rev.D
~german no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, precision ground
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic crack tested AMS2630,cl.A
diam. 8.10 mm, tolerance ISO h8
bars 3m
ground
h 8
3073 kg
0
260 224 - 1423.000|230 424 - 1650.000
8-100
bars-3m
ground
h-8-en
14.000
51513114000
Chronifer M-465 KL
Custom 465, as per ASTM F-899, UNS S46500
ASTM A564/A564M, AMS 5936
high tech medical Chrome-steel, VIM-VAR
solution annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed, chamfered
ultrasonic inspected per AMS 2630 Cl. A Rev. C
diam. 14.00 mm, tolerance ISO h7
bars 3m
ground
h 7
1608 kg
0
020 717 - 466.350|260 324 - 1142.000
14-000
bars-3m
ground
h-7-en
95.000
51511895000
Chronifer M-465 KL
Custom 465,AMS 5936 capable of H1000
Revision C, reaffirmed 10/12, AMS 5936 Capable of H950 Rev. C reaffirmed 10/12
Boeing Aerospace CO BSS 7025 /07/12/94)
Boeing Aerospace CO BMS 7-364 Cap of H950/H1000 , Rev. A
$afran Landing Systems MTL-1304 issue 2
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, smooth turned
in lengths of 4.05 – 4.3mm
ultrasonic tested as per AMS-STD-2154
Type I, Class AA , Rev. E
Dia. 95 mm tolerance +/- 0.127mm
special length
ground
spec.
1868 kg
0
010 722 - 1868.400
95-000
special-length
ground
spec-en
34.000
51513234000
Chronifer M-465 KL
Custom 465 (S46500), ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev. D
~W.Nr. 1.4614, VIM/VAR remelted
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630AA Rev. D
Dia. 34.00 mm, tolérance ISO h8
bars 3m
ground
h 8
767 kg
0
021 122 - 767.000
34-000
bars-3m
ground
h-8-en
24.000
51513124000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A
AMS 5936 rev. D, UNS S46500
AMS2603 class AA, rev D (01/10)
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent +US crack tested
Dia. 24.00 mm, tolerance +/- 0.016mm
Chronifer M-465 KL
Custom 465,AMS 5936 capable of H1000
Revision C, reaffirmed 10/12, AMS 5936 Capable of H950 Rev. C reaffirmed 10/12
Boeing Aerospace CO BSS 7025 /07/12/94)
Boeing Aerospace CO BMS 7-364 Cap of H950/H1000 , Rev. A
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, smooth turned
in lengths of 3 – 3.65m
ultrasonic tested as per AMS-STD-2154
Type I, Class A, , Rev. C
Dia. 80.0 mm (3.15″), +0.15/0 mm
special length
ground
spec.
0 kg
0
0
80-000
special-length
ground
spec-en
72.000
51513372000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A,
AMS 5936 Rev. D, UNS S46500
BMS 7-364 Rev A 09/05/2006 Cl. A
Safran Landing systems SREQ-SLS-001
Issue 2 04/04/2018
~German no 1.4614, VIM/VAR remelted
high tech medical/aeronautical Chrome-steel
solution sub-zero cooled,
annealed, precision ground
in bars of 3m lengths 2.8 – 3m
100% ultrasonic crack tested per AMS-STD-2154 Rev E 07/01/2021 Type 1 Cl. AA
Dia. 72.00 mm, tolerance ISO h9
bars 3m
ground
h 9
1390 kg
0
191 222 - 1390.000
72-000
bars-3m
ground
h-9-en
43.000
51513343000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A,
AMS 5936 Rev. D, UNS S46500
BMS 7-364 Rev A 09/05/2006 Cl. A
Safran Landing systems SREQ-SLS-001
Issue 2 04/04/2018
~German no 1.4614, VIM/VAR remelted
high tech medical/aeronautical Chrome-steel
solution sub-zero cooled,
annealed, precision ground
in bars of 3m lengths (+30/0mm)
100% ultrasonic crack tested per AMS-STD-2154 Rev E 07/01/2021 Type 1 Cl. AA
Dia. 43.00 mm, tolerance ISO h9
bars 3m
ground
h 9
507 kg
0
130 123 - 507.400
43-000
bars-3m
ground
h-9-en
52.000
51513352000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A,
AMS 5936 Rev. D, UNS S46500
BMS 7-364 Rev A 09/05/2006 Cl. A
Safran Landing systems SREQ-SLS-001
Issue 2 04/04/2018
~German no 1.4614, VIM/VAR remelted
high tech medical/aeronautical Chrome-steel
solution sub-zero cooled,
annealed, precision ground
in bars of 3m lengths (+30/0mm)
100% ultrasonic crack tested per AMS-STD-2154 Rev E 07/01/2021 Type 1 Cl. AA
Dia. 52.00 mm, tolerance ISO h9
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A,
AMS 5936 Rev. D, UNS S46500
BMS 7-364 Rev A 09/05/2006 Cl. A
Safran Landing systems SREQ-SLS-001
Issue 2 04/04/2018
~German no 1.4614, VIM/VAR remelted
high tech medical/aeronautical Chrome-steel
solution sub-zero cooled,
annealed, precision ground
in bars of 3m lengths (+30/0mm)
100% ultrasonic crack tested per AMS-STD-2154 Rev E 07/01/2021 Type 1 Cl. AA
Dia. 76.20 mm (3”), tolerance ISO h9
bars 3m
ground
h 9
0 kg
4375
290 323 - 532.500
76-200
bars-3m
ground
h-9-en
33.000
51513233000
Chronifer M-465 KL
Custom 465 (S46500), ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev. D
~W.Nr. 1.4614, VIM/VAR remelted
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630AA Rev. D
Dia. 33.00 mm, tolérance ISO h8
bars 3m
ground
h 8
1270 kg
0
160 223 - 1270.000
33-000
bars-3m
ground
h-8-en
29.000
51513229000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 Rev. D
high tech medical Chrome-Steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630AA, Rev. D
Dia. 29.00 mm, tolérance ISO h8
bars 3m
ground
h 8
725 kg
0
290 323 - 725.000
29-000
bars-3m
ground
h-8-en
32.000
51513232000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 Rev. E
high tech medical Chrome-Steel
solution annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: chamfered, heat stamp
ultrasonic tested per AMS2630AA Rev. D
Dia. 32.00 mm, tolérance ISO h8
bars 3m
ground
h 8
1564 kg
0
260 224 - 1564.000
32-000
bars-3m
ground
h-8-en
48.000
51513348000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
~German no 1.4614, VIM/VAR remelted
ASTM A564/A564M-19A,
AMS 5936 Rev. D, UNS S46500
BMS 7-364 Rev A 09/05/2006 Cl. A
Safran Landing systems SREQ-SLS-001
Issue 2 04/04/2018
high tech medical/aeronautical Chrome-steel
solution sub-zero cooled,
annealed, precision ground
in bars of 3m lengths (+30/0mm)
100% ultrasonic crack tested per AMS-STD-2154 Rev E 07/01/2021 Type 1 Cl. AA
Dia. 48.00 mm, tolerance ISO h9
bars 3m
ground
h 9
1486 kg
0
260 624 - 129.000|200 824 - 1357.000
48-000
bars-3m
ground
h-9-en
44.750
51513844750
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev.D
UNS S46500, VIM/VAR remelted
high tech medical Chrome-steel
solution annealed, ground
in lengths of 3m (+25.4/0mm)
end of bars: chamfered
ultrasonic inspected perAMS AMS 2630AA Rev E
Dia. 44.75 mm tolerance 0/-0.040mm
bars 3m
ground
spec.
441 kg
1454
230 323 - 440.800
44-750
bars-3m
ground
spec-en
6.350
51511806350
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, UNS S46500
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
Medtronic MSD-MS-110 cap. H1000
Stryker HMS 4553, cap. of H1000
RoHS and Reach conforme
cold worked, ground, cond. A
in bars of 3.65m (144”) lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic inspected as per AMS 2630A,Rev. D
Dia. 6.35 mm (1/4″), tolerance +0.035/+0.043mm
special length
ground
spec.
586 kg
0
230 523 - 585.700
6-350
special-length
ground
spec-en
7.930
51513207930
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, AMS 5936 rev.D
~mat. no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, cold worked, ground
in bars of 3m lengths (+25.4/0mm)
end of bars: pointed, chamfered,
eddycurrent crack tested,
ultrasonic inspected per AMS 2630A, Rev. E
Dia. 7.93 mm (5/16″) tolerance ISO h8
bars 3m
ground
h 8
0 kg
0
0
7-930
bars-3m
ground
h-8-en
24.000
51513824000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19
AMS 5936 rev. D, UNS S46500
AMS2603 class AA, rev D (01/10)
~no mat. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
annealed, precision ground
in bars of 3m lengths (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent +US crack tested
Dia. 24.00 mm, tolerance 0/-0.070mm
bars 3m
ground
spec.
0 kg
0
0
24-000
bars-3m
ground
spec-en
4.760
51511804760
Brief description
Designation Klein:
CHRONIFER 465 KL
Class of metals:
Precipitation hardening stainless steel
Material number:
1.4614
Standard ASTM:
A 564
Melting and re-melting:
VIM and VAR
Machinability:
up to satisfactory
Hardening capability:
up to 57 HRc
Polishing ability:
adapted for mirror polishing
Corrosion resistance:
satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
UNS S46500 / Chronifer 465 KL, as per ASTM F 899, martensitic precipitation age hardenable Stainless Steel for Medical Instruments bars
Custom 465 is available in stock as bars/rods. Chronifer 465 KL, steel for medical instruments, is a product of Carpenter steel under the protected brand name Custom 465. The norm ASTM F-899 has already added this high tech steel under UNS S46500.
Properties of Custom 465 / UNS S46500
With the Custom 465 the very good properties of Custom 455 were further improved. The premium melted martensitic, age-hardenable steel, has a capablility of ultimate tensile strength of over 1700 MPa (250ksi) in the overaged condition H 900. His toughness is significantly higher than that of other precipitation-steels and its notch tensile strength is low. Custom 465 has a good combination of fracture strength and resistance to pitting corrosion. Its corrosion resistance is nearly like that of an austenitic steel (18-8 steel, AISI 304, 1.4301).
Applications of Custom 465 / 1.4614
This alloy is designed for applications in the field of excellent notch tensile strength and fracture toughness for medical instruments.
Custom 465 meets the high demands on materials, that are required in the medical technology. It is used for the production of endoscopic instruments for surgery and for dental instruments, needles, needle wires and other instruments with small diameters.
special length
ground
spec.
121 kg
0
271 010 - 43.590|071 210 - 77.860
4-760
special-length
ground
spec-en
4.760
51513004760
Chronifer M-465 KL
Custom 465, as per ASTM F-899
ASTM A564-13, AMS 5936, Rev. C
high tech medical Chrome-steel
cold worked, precision ground
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
diam. 4.76 mm (3/16″), tolerance ISO h6
bars 3m
ground
h 6
142 kg
0
151 223 - 141.500
4-760
bars-3m
ground
h-6-en
8.000
51513908000
Chronifer M-465 KL
Custom 465, as per ASTM F-899-20
ASTM A564/A564M-19A, (S46500),
as per AMS 5936 rev.D
~no. 1.4614, VIM/VAR remelted
high tech medical Chrome-steel
cold worked, ground, in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
ultrasonic crack tested AMS2630,cl.A
diam. 8.00 mm, tolerance ISO h5
