satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
XM-16 F-899 Instruments Medical steel bars
XM-16 is available in stock as bars/rods. General features: The Chronifer 455 KL (AISI XM-16) is a martensitic precipitation steel, based on fine structure, with high corrosion resistance and high tenacity.
Application field: The Chronifer 455 KL (Custom 455, Ergste 1.4543GG) is a medical steel which is designed for high grade instruments like screw drivers, long shafts, which have to withstand torsion resistance.
The Chronifer 455 KL is a soft martensitic fine steel due to it’s low carbon content. The highest hardness of apprx. 49 HRC can be achieved at condition H900. This is siginificantly higher than the standard PH Grade Aisi 630 (17-4PH) steel. The high hardness enhances the wear resistance and deformation resistance.
Since this steel doesn’t built up Chrome-Carbides, it is not specially recommended for cutting blades.
CHRONIFER 455 KL
XM-16, as per AMS 5617 Rev. J
solution annealed (cond. A)
as per ASTM A564-04,
ASME-SA564-04, ASTM F-899
ground, in approx. 3.6m bars
diam. 9.52 mm (3/8″) +/-0.038mm
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
as per ASTM F-899, AMS 5617 Rev J
ASTM A564-04, ASME-SA564, XM16
solution annealed (cond. A)
ground, in approx. 3.6m bars
eddy current tested
diam. 22.20 mm (7/8″), +/-0.050mm
CHRONIFER 455 KL
Custom 455, XM 16, UNS S45500
(German norms. 1.4543, X3CrNiCuTiNb12.9)
as per Medtronic MSD-MS-107
as per AMS 5617 Rev.K,
and ASTM-A564/A564M-19A, ASTM F-899-20
solution annealed (cond. A)
ground, in apprx. 3.65m bars,1ultrasonic tested
diam. 25.40 mm (1″), tolerance +/-0.015 mm
special length
ground
spec.
479 kg
0
220 523 - 479.000
25-400
special-length
ground
spec-en
4.000
51413004000
CHRONIFER 455 KL
W. Nr. 1.4543, ~XM16
X3CrNiCuTiNb12.9, UNS S45500
NF S94 090, ASTM A313/A313M (chem)
ESR remelted, as per ASTM F-899
ASTM A564/A564M, ASTM A959
solution annealed (cond. A)
ground, polished, in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl. 4
diam. 4.00 mm, tolerance ISO 286-2/ h6
CHRONIFER 455 KL
W. Nr. 1.4543, XM16
X3CrNiCuTiNb12.9, ASTM A564/A564M
ESR remelted, ASTM F-899
solution annealed (cond. A)
cold drawn, ground, polished
in 3m bars (+30/0mm)
pointed, chamfered ends
eddycurrent crack tested
diam. 3.50 mm, tolerance ISO h6
bars 3m
ground
h 6
460 kg
0
260 407 - 0.350|091 211 - 459.500
3-500
bars-3m
ground
h-6-en
5.000
51413205000
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
as per AMS 5617 Rev. K, ASTM A564/A564M
und ASME-SA 564/A564M-19,, XM-16
ASTM F-899-20, NF S94 090 UNS S45500
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
diam. 5.00 mm, tolerance ISO h8
bars 3m
ground
h 8
978 kg
0
140 610 - 20.589|220 622 - 955.000
5-000
bars-3m
ground
h-8-en
8.000
51413208000
CHORNIFER 455 KL
~no 1.4543, X3CrNiCuTiNb12.9
as per AMS 5617 Gr. 1 Rev J, ASTM A564
and ASME-SA 564, ASTM F-899 (XM-16)
solution annealed (cond. A)
drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 8.00 mm, tolerance ISO h8
bars 3m
ground
h 8
634 kg
0
170 119 - 634.364
8-000
bars-3m
ground
h-8-en
10.000
51413210000
Chronifer 455 KL
as per AMS 5617, ASTM A564
and ASME-SA 564, ASTM F-899
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 10.00 mm, tolerance ISO h8
bars 3m
ground
h 8
0 kg
0
0
10-000
bars-3m
ground
h-8-en
6.000
51413006000
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9,
ASTM F-899 (chem. only), UNS S45500 XM-16
ASTM A564/A564M, AST A313/A313M
NF S94 090, ~AMS 5617
solution annealed (cond. A), ESR
cold drawn, ground, polished
in 3m lengths (+40/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
UT per AMS-STD 2154A, AMS 2632A
diam. 6.00 mm, tolerance ISO h6
bars 3m
ground
h 6
482 kg
800
140 911 - 9.092|060 219 - 473.000
6-000
bars-3m
ground
h-6-en
7.000
51413007000
CHRONIFER 455 KL
W. Nr. 1.4543, AISI XM16
X3CrNiCuTiNb12.9, as per ASTM F899
UNS S45500, NF S94 090, RoHS conforme
ASTM A959, ASTM A564/A564M
solution annealed (cond. A)
cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed, chamfered
eddycurrent crack tested cl. 4,
UT: AMS-STD 2154A/AMS2632C (Swissline)
diam. 7.00 mm, tolerance ISO h6
CHRONIFER 455 KL
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
ASTM-F-899, AMS 5617 Grade 1,Rev.K
ASTM A564/A564M, ASME-SA 564
UNS S51400 (XM-16)
as per french medical norms NF S94 090
stainless steel precipitation hardenable
solution annealed (cond. A) ground,
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultraschall geprüft gem. AMS2630, cl. A
diam. 18.00 mm, tolerance ISO h7
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
ASTM 313A/313M
Swissline Ausführung gemäss AMS-STD 215A
AMS 2632A, ASTM F899-20, AISI XM-16, UNS S45500, NF S 94-090, ASTM (Chemistry only)
ASTM A564/A564M, ASTM A959
similar to AMS 5617, RoHS Konform
ground, polisched, in 3m bars (+40/0mm)
pointed and chamfered end of bars,
eddycurrent crack tested
diam. 12.70 mm (1/2″), tolerance ISO 286-2/h6
bars 3m
ground
h 6
1497 kg
0
230 222 - 499.500|170 424 - 997.800
12-700
bars-3m
ground
h-6-en
31.750
51411831750
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
as per AMS 5617 Rev. J,
and ASTM-A564-04 and ASTM F-899
solution annealed (cond. A)
ground, in 3 – 3.6m bars
diam. 31.75 mm, (1 1/4″) +/-0.06mm
special length
ground
spec.
96 kg
0
120 511 - 95.940
31-750
special-length
ground
spec-en
14.000
51413214000
CHORNIFER 455 KL
as per AMS 5617, ASTM A564
and ASME-SA 564, ASTM F-899
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 14.00 mm, tolerance ISO h8
bars 3m
ground
h 8
405 kg
0
060 818 - 404.739
14-000
bars-3m
ground
h-8-en
44.450
51411844450
CHRONIFER 455 KL
~W. Nr. 1.4543, ~X3CrNiCuTiNb12.9
ASTM-A 564, ASME SA564, XM 16
ASTM F-899, AMS 5617 Rev. K Grade 1
NF S94-090 (11/05) chem. only
solution annealed (cond. A)
ground, in approx. 3.65m bars
diam. 44.45 mm (1 3/4″),tolerance +/-0.07 mm
special length
ground
spec.
0 kg
0
0
44-450
special-length
ground
spec-en
2.000
51413002000
CHRONIFER 455 KL
W. Nr. 1.4543, ~XM16
X3CrNiCuTiNb12.9, EN 10088-3
ESR remelted, AMS 5617
ASTM A313/A313M (chem. only)
ASTM A276, ASTM A564,
ASTM F-899, NFS 94 090
solution annealed (cond. A)
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 2.00 mm, tolerance ISO h6
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9,
ASTM A276, ASTM A564,
ASTM F-899, NF S94 090, ~XM16
ESR remelted, solution annealed (cond. A)
ground, polished, in 3m bars (+40/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 9.00 mm, tolerance ISO h6
bars 3m
ground
h 6
608 kg
0
150 212 - 607.700
9-000
bars-3m
ground
h-6-en
8.000
51413008000
CHRONIFER 455 KL
mat.no 1.4543, AISI XM16
X3CrNiCuTiNb12.9,
UNS S45500, ESU remelted
AMS 5617,ASTM A276, ASTM A564,
ASTM F-899, NF S 94 090
solution annealed (cond. A)
ground, polished, in 3m bars
end of bars: pointed, chamfered,
100% eddy current crack tested, cl. 3
diam. 8.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1551 kg
0
220 212 - 80.333|070 323 - 1470.800
8-000
bars-3m
ground
h-6-en
3.000
51413003000
CHRONIFER 455 KL
~W. Nr. 1.4543, ASTM F-899-20, NF S94 090
X3CrNiCuTiNb12.9, ASTM A564/A564M
and ASME-SA564 2007 Grade XM16
~AMS 5617 rev. J (05/06 Grade 1
annealed, ground, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
diam. 3.00 mm, tolerance ISO 286-2/h6
CHORNIFER 455 KL
as per AMS 5617, ASTM A564
and ASME-SA 564, ASTM F-899
as per french medical norms NF S94 090
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
pointed, chamfered, eddy current tested
diam. 12.00 mm, tolerance ISO h8
bars 3m
ground
h 8
411 kg
0
250 412 - 410.780
12-000
bars-3m
ground
h-8-en
20.000
51413220000
CHORNIFER 455 KL
per AMS 5617 Grade 1,Rev.J, ASTM A564
and ASME-SA 564, ASTM F-899
as per norms NF S 94-090, XM-16
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 20.00 mm, tolerance ISO h8
CHRONIFER 455 KL
~W. Nr. 1.4543, as per ASTM-A 564
AMS 5617 Rev. J, Grade 1, ASME-SA564-07,
Grade XM-16, ASTM F-899 and NF S 94090
solution annealed (cond. A)
precision ground, in 3m bars (+25.4/0mm)
chamfered at both ends,
100% eddycurrent crack tested
diam. 38.10 mm, 0/-0.05 mm
bars 3m
ground
spec.
1 kg
0
191 010 - 0.800
38-100
bars-3m
ground
spec-en
25.400
51413225400
CHRONIFER 455 KL
no. 1.4543, X3CrNiCuTiNb12.9
as per AMS 5617 Rev. J,
and ASTM-A564-04 and ASTM F-899
solution annealed (cond. A)
ground, in 3m bars
diam. 25.40 mm (1”), tolerance ISO h8
bars 3m
ground
h 8
888 kg
0
110 111 - 178.300|311 012 - 710.000
25-400
bars-3m
ground
h-8-en
25.000
51411025000
CHRONIFER 455 KL
no 1.4543, X3CrNiCuTiNb12.9
AMS 5617 Rev K
ASTM-A564/A564M-19A, ASTM F-899-20
solution annealed (cond. A)
ground, in 3.65m bars
diam. 25.00 mm, Toleranz ISO h6
special length
ground
h 6
491 kg
0
220 523 - 490.700
25-000
special-length
ground
h-6-en
3.175
51413203175
CHRONIFER 455 KL
~W. Nr. 1.4543, ASTM F-899-09
X3CrNiCuTiNb12.9, ASTM A564/A564M
and ASME-SA564 2007 Grade XM16
AMS 5617 rev. J (05/06 Grade 1
annealed ground, in 3m bars (+30/0mm)
diam. 3.175 mm (1/8″), tolerance ISO h8
bars 3m
ground
h 8
587 kg
0
210 311 - 138.470|180 612 - 449.000
3-175
bars-3m
ground
h-8-en
50.800
51411850800
CHRONIFER 455 KL
~W. Nr. 1.4543, ~X3CrNiCuTiNb12.9
ASTM-A 564, ASME SA564, XM 16
AMS 5617 Rev. J, Grade 1
ASTM F-899-09, ASTM A484-08
solution annealed (cond. A)
ground, in approx. 3.65m bars
diam. 50.80 mm (2″), +/-0.07 mm
special length
ground
spec.
13 kg
0
120 112 - 13.400
50-800
special-length
ground
spec-en
28.000
51413228000
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
as per AMS 5617 Rev. J,
and ASTM-A564/564M and ASTM F-899
ASME SA564, NF S94-090
solution annealed (cond. A)
precicison ground, in 3m lengths (+30/0mm)
end of bars: chamfered
ultrasonic and eddycurrent crack tested
diam. 28.0mm, tolerance ISO h8
bars 3m
ground
h 8
515 kg
1468
231 111 - 515.200
28-000
bars-3m
ground
h-8-en
22.000
51413222000
CHORNIFER 455 KL
as per AMS 5617, ASTM A564
and ASME-SA 564, ASTM F-899
as per norms NF S94-090
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic inspected as per AMS 2630E, Kl. A
diam. 22.00 mm, tolerance ISO h8
CHORNIFER 455 KL
as per AMS 5617, ASTM A564
and ASME-SA 564, ASTM F-899
as per norms NFS 94-090
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 25.00 mm, tolerance ISO h8
bars 3m
ground
h 8
1681 kg
0
091 111 - 329.800|190 324 - 1351.000
25-000
bars-3m
ground
h-8-en
40.000
51413240000
CHORNIFER 455 KL
as per AMS 5617 Grade 1, ASTM A564
and ASME-SA 564, ASTM F-899-12B
as per norms NF S94-090, UNS S45500
~mat.no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
end of bars: chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS 2630A, Rev.C
diam. 40.00 mm, tolerance ISO h8
bars 3m
ground
h 8
1151 kg
0
260 218 - 4.800|310 523 - 1146.600
40-000
bars-3m
ground
h-8-en
45.000
51413245000
CHORNIFER 455 KL
per AMS 5617 Grade 1, Rev, J,
and ASME-SA564, ASTM F-899
as per norms NFS 94-090, ASTM A564-10, XM-16
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
precipitation hardening stainless steel
VIM + VAR remelted, solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
end of bars: chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS 2630C, Rev. C
diam. 45.00 mm, tolerance ISO h8
bars 3m
ground
h 8
441 kg
1345
231 111 - 31.900|250 320 - 408.900
45-000
bars-3m
ground
h-8-en
30.000
51413230000
CHRONIFER 455 KL
~W. Nr. 1.4543, as per ASTM-A 564
AMS 5617 Rev. J, Grade 1,
ASME-SA564-07 Grade XM16
ASTM F-899, NFS 94090
solution annealed (cond. A)
precision ground, in 3m bars (+25.4/0mm)
end of bars: chamfered,
100% eddycurrent crack tested
ultrasonic inspected per AMS2630A, Rev.C
diam. 30.00 mm, tolerance ISO h8
bars 3m
ground
h 8
1946 kg
0
110 618 - 639.400|311 024 - 1307.000
30-000
bars-3m
ground
h-8-en
15.000
51413215000
CHORNIFER 455 KL
as per AMS 5617, ASTM A564, XM-16
and ASME-SA 564, ASTM F-899
~no. 1.4543, X3CrNiCuTiNb12.9
and French norms NF S 94-090
solution annealed (cond. A), ground
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 15.00 mm, tolerance ISO h8
bars 3m
ground
h 8
33 kg
0
040 511 - 32.500
15-000
bars-3m
ground
h-8-en
12.000
51413012000
CHORNIFER 455 KL
German no1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
gemäss ASTM F899-20, NF S94 090
ASTM A313/A313M (chem. An.)
ASTM A564/A564M, XM-16
ASTM A959, ~AMS 5617, UNS S45500
ground, polisched, in 3m bars (+ 40/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl. 4
Swissline (AMS-STD 2154 + AMS 2630A)
diam. 12.00 mm, tolerance ISO h6
W. Nr. 1.4543, ~XM16
X3CrNiCuTiNb12.9, EN 10088-3
UNS S45500, ASTM A959
ASTM A276, ASTM A564/A564M,
ASTM F-899, NF S 94-090
solution annealed (cond. A)
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 2.80 mm, tolerance ISO h6
bars 3m
ground
h 6
303 kg
0
210 312 - 303.000
2-800
bars-3m
ground
h-6-en
25.000
51411125000
CHRONIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
as per AMS 5617 Rev. J,
and ASTM-A564-04 and ASTM F-899
solution annealed (cond. A)
ground, in 3 – 3.65m bars
diam. 25.00 mm, Toleranz ISO h7
special length
ground
h 7
0 kg
0
0
25-000
special-length
ground
h-7-en
13.000
51413213000
CHORNIFER 455 KL
as per AMS 5617, ASTM A564
and ASME-SA 564, ASTM F-899
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 13.00 mm, tolerance ISO h8
bars 3m
ground
h 8
377 kg
0
190 612 - 376.962
13-000
bars-3m
ground
h-8-en
12.700
51413212700
CHORNIFER 455 KL
as per AMS 5617 Gr.1, Rev. K
UNS S45500, NF S94-090
ASTM A564/A564M-119, XM-16,
and ASME-SA 564, ASTM F-899-20
~W. Nr. 1.4543, ~X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS 2630A, Rev. D
diam. 12.70 mm (1/2″), tolerance ISO h8
bars 3m
ground
h 8
164 kg
0
310 822 - 163.986
12-700
bars-3m
ground
h-8-en
2.700
51413002700
CHORNIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
UNS S45500, XM-16, ASTM F-899
NF S94 090, ASTM A959, A564/564M
ASTM A313/313A (chem. only)
solution annealed (cond. A)
ground, polished, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 2.70 mm, tolerance ISO h6
bars 3m
ground
h 6
380 kg
0
260 112 - 379.700
2-700
bars-3m
ground
h-6-en
15.000
51413015000
CHORNIFER 455 KL
German no1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
gemäss ASTM F899, NF S94 090
ASTM A313/A313M (chem. only)
ASTM A564/A564M, ASTM A959,
UNS S45500, XM-16, ESR remelted
ground, polished, in 3m bars (+ 40/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested
Swissline execution with ultrasonic test
diam. 15.00 mm, tolerance ISO h6
bars 3m
ground
h 6
965 kg
0
231 013 - 651.050|070 824 - 314.400
15-000
bars-3m
ground
h-6-en
16.000
51413216000
CHORNIFER 455 KL
as per AMS 5617, ASTM A564/A564M-19,
XM-16 and ASME-SA 564, ASTM F-899-20
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
and french norms NF S94-090
solution annealed (cond. A), ground
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS2630A, Rev. D
diam. 16.00 mm, tolerance ISO h8
CHORNIFER 455 KL
~ W. Nr. 1.4543, ~X3CrNiCuTiNb12.9
as per AMS 5617 Rev J, XM-16
ASTM A564/A564M-19A, UNS S 45500
und ASME-SA 564/SA-564M-19, ASTM F-899-20
und NF S94-090, XM-16, AMS 2630 rev E
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic tested as per AMS 2630 Rev E
diam. 23.00 mm, tolerance ISO h8
bars 3m
ground
h 8
465 kg
1364
130 324 - 465.200
23-000
bars-3m
ground
h-8-en
38.100
51413238100
CHRONIFER 455 KL
~W. Nr. 1.4543, as per ASTM-A 564
AMS 5617 Rev. J, Grade 1, ASME-SA564-07,
Grade XM-16, ASTM F-899 and NF S94 090
solution annealed (cond. A)
precision ground, in 3m bars +25.4/0mm
end of bars: chamfered
100% eddycurrent+US crack tested as per
AMS 2630 class A Rev. C (01/01/10)
diam. 38.10 mm (1 1/2″), tolerance ISO h8
bars 3m
ground
h 8
1030 kg
0
120 917 - 6.000|031 018 - 1024.100
38-100
bars-3m
ground
h-8-en
21.000
51413221000
CHORNIFER 455 KL
as per AMS 5617 rev J, ASTM A564-13
as per NF S 94-090, ASTM F-899-12B
~W. Nr. 1.4543,~ X3CrNiCuTiNb12.9
precipitation hardening stainless steel
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic tested per AMS2630 rev C
diam. 21.00 mm, tolerance ISO h8
bars 3m
ground
h 8
534 kg
0
300 914 - 533.900
21-000
bars-3m
ground
h-8-en
24.000
51413224000
CHORNIFER 455 KL
as per AMS 5617 rev J, ASTM A564-13
and ASME-SA 564-13, ASTM F-899-12B
as per norms NF S 94-090, AiSI XM-16
~no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished, in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic tested per AMS 2630A rev C
diam. 24.00 mm, tolerance ISO h8
bars 3m
ground
h 8
762 kg
0
260 224 - 761.500
24-000
bars-3m
ground
h-8-en
27.000
51413227000
CHORNIFER 455 KL
as per AMS 5617 rev J, ASTM A564-13
and ASME-SA 564-11, ASTM F-899-12B
as per norms NF S 94-090, AiSI XM-16
~German No. 1.4543, X3CrNiCuTiNb12.9
VIM/VAR remelted,
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic tested as per AMS 2630 rev C
diam. 27.00 mm, tolerance ISO h8
bars 3m
ground
h 8
401 kg
0
230 914 - 400.500
27-000
bars-3m
ground
h-8-en
7.500
51413007500
CHRONIFER 455 KL
W. Nr. 1.4543, AISI XM-16
X3CrNiCuTiNb12-9,
UNS S45500, ESR remelted
ASTM A313/A313M (Chem. Only)
ASTM A564/A564AM, ASTM F 899-20,
NF S94 090, A959 ähnlich AMS 5617
RoHs Konform
solution annealed (cond. A)
cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed, chamfered
eddycurrent crack tested cl. 4
Swissline (ultrasonic inspected per AMS-STD 2154A/AMS 2632A)
diam. 7.50 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
129 kg
800
150 824 - 129.400
7-500
bars-3m
ground
h-6-en
50.000
51413250000
CHORNIFER 455 KL
as per AMS 5617 Grade 1
and ASME-SA 564, ASTM F-899-12B
as per norms NF S94-090,ASTM A564/A564M-17
~Mat.no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
end of bars: chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS 2630A, Rev.C
diam. 50.00 mm, tolerance ISO h8
bars 3m
ground
h 8
428 kg
0
260 218 - 427.800
50-000
bars-3m
ground
h-8-en
35.000
51413235000
CHRONIFER 455 KL
~W. Nr. 1.4543, gemäss ASTM-A 564/A564M-19A
AMS 5617 Rev. J, Grade 1,
Grade XM-16, ASTM F-899-20, NF S94 090
ASME SA 564/SA-5643M 2019, UNS S45500
solution annealed (cond. A)
precision ground, in 3m bars (+30/0mm)
end of bars: chamfered
100% eddycurrent+US crack tested as per
AMS 2630lA Rev. E
diam. 35.00 mm tolerance ISO h8
bars 3m
ground
h 8
301 kg
1344
260 324 - 609.000|230 424 - 292.000
35-000
bars-3m
ground
h-8-en
48.000
51413248000
CHORNIFER 455 KL
as per AMS 5617 Grade 1,
and ASME-SA 564, ASTM F-899-12B
per norms NF S94-090, ASTM A564/A564M
~Mat.no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
end of bars: chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS 2630A, Rev.C
diam. 48.00 mm, tolerance ISO h8
bars 3m
ground
h 8
1187 kg
0
161 118 - 1187.000
48-000
bars-3m
ground
h-8-en
1.050
51403201500
CHORNIFER 455 KL
W. Nr. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
in bars of 3m lengths
diam. 1.05 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
1-050
bars-3m
drawn
h-8-en
1.050
51403201050
CHORNIFER 455 KL
no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
cold drawn, in 3m bars
diam. 1.05 mm, tolerance ISO h8
bars 3m
drawn
h 8
16 kg
0
081 009 - 16.400
1-050
bars-3m
drawn
h-8-en
1.000
51403001000
CHORNIFER 455 KL
no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
cold drawn, in 3m bars
diam. 1.00 mm, tolerance ISO h6
bars 3m
drawn
h 6
16 kg
0
081 009 - 15.980
1-000
bars-3m
drawn
h-6-en
1.000
51400601000
CHORNIFER 455 KL
no 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
cold drawn, in coils
diam. 1.00 mm, tolerance ISO fg6
in spools
drawn
fg 6
15 kg
0
081 009 - 15.300
1-000
in-spools
drawn
fg-6-en
4.760
51413004760
CHRONIFER 455 KL
mat.no 1.4543, UNS S45500 XM16
X3CrNiCuTiNb12.9, EN 10088-3 12/14
~AMS 5617, ASTM A564/A564M
ASTM F-899-20, NF S94 090, ASTM A959
ASTM A313/A313M (chemical only)
solution annealed (cond. A)
cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. e
diam. 4.76 mm (3/16”), tolerance ISO 286-2/h6
bars 3m
ground
h 6
837 kg
0
080 223 - 837.300
4-760
bars-3m
ground
h-6-en
26.000
51413226000
CHRONIFER 455 KL
(German no 1.4543, X3CrNiCuTiNb12.9)
as per AMS 5617 Grade 1, Rev K,
und ASTM-A564/A564M und ASTM F899
ASME-SA564/A564M (XM16), NF S94-090
solution annealed (cond. A)
precison ground, in 3m lengths (+30/0mm)
end of bars: chamfered
ultrasonic inspected per AMS 2630 Cl. A, Rev. D
diam. 26.0mm, tolerance ISO h8
bars 3m
ground
h 8
1271 kg
0
231 120 - 1271.100
26-000
bars-3m
ground
h-8-en
30.000
51411230000
CHRONIFER 455 KL
~W. Nr. 1.4543, as per ASTM-A 564
AMS 5617 Rev. J, Grade 1,
ASME-SA564-07 Grade XM16
ASTM F-899, NFS 94090
precipitation hardened to H1000 SPE.T.2 rev 3
precision ground, in ~750mm lengths
100% eddycurrent crack tested
ultrasonic inspected per AMS2630A, Rev.C
diam. 30.00 mm, tolerance ISO h8
special length
ground
h 8
0 kg
0
0
30-000
special-length
ground
h-8-en
11.112
51413211112
CHORNIFER 455 KL
as per AMS 5617 Grade 1
and ASME-SA 564, ASTM F-899-20
as per norms NF S94-090,ASTM A564/A564M-17
~mat.no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
ground, polished, in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
ultrasonic inspected per AMS 2630A, Rev.D
diam. 11.112 mm (7/16”), tolerance ISO h8
bars 3m
ground
h 8
0 kg
0
0
11-112
bars-3m
ground
h-8-en
7.900
51413807900
CHORNIFER 455 KL
~no. 1.4543, X3CrNiCuTiNb12.9
as per AMS 5617 Gr. 1 Rev J, ASTM A564-10
and ASME-SA 564, ASTM F-899-11 (XM-16)
solution annealed (cond. A)
drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
diam. 7.90 mm, tolerance ISO f6
bars 3m
ground
spec.
0 kg
0
0
7-900
bars-3m
ground
spec-en
50.800
51413250800
CHORNIFER 455 KL
as per AMS 5617 Grade 1
and ASME-SA 564, ASTM F-899-20
as per norms NF S94-090,ASTM A564/A564M-19A
~Mat.no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
100% eddy current crack tested
ultrasonic inspected per AMS 2630A, Rev. E
diam. 50.80 mm (2”), tolerance ISO h8
bars 3m
ground
h 8
519 kg
1355
310 822 - 519.439
50-800
bars-3m
ground
h-8-en
63.500
51413863500
CHORNIFER 455 KL
as per AMS 5617 Rev K, Grade 1, XM16
and ASME-SA 564, ASTM F-899-20
as per norms NF S94-090,ASTM A564/A564M-17
~Mat.no. 1.4543, X3CrNiCuTiNb12.9
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
100% eddy current crack tested
ultrasonic inspected per AMS 2630A, Rev. D
diam. 63.5 mm (2.5”), tolerance ISO h8
bars 3m
ground
spec.
1025 kg
0
190 922 - 1025.400
63-500
bars-3m
ground
spec-en
7.000
514130063501
CHRONIFER 455 KL
no. 1.4543, AISI XM16
X3CrNiCuTiNb12.9, as per ASTM F899
UNS S45500, NF S94 090, RoHS conforme
ASTM A959, ASTM A564/A564M
hardness 470-560 HV (47-53 HRC)
cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed, chamfered
eddycurrent crack tested cl. 4,
UT: AMS-STD 2154A/AMS2632C
diam. 6.35 mm (1/4”), tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
7-000
bars-3m
ground
h-6-en
60.000
51413360000
CHRONIFER 455 KL
~ W. Nr. 1.4543, X3CrNiCuTiNb12.9, EN10088-3
gemäss AMS 5617 Rev. K, Grade 1,
ASTM F-899-20, UNS S45500, /XM-16)
und NF S94-090, ASTM A564/A564M-19A
ASME SA-564/SA-564M-19
solution annealed (cond. A)
precision ground, polished
in straight length of 3m (+30/0mm)
ultrasonic inspected per AMS 2630A, Rev. E
diam. 60.00 mm (2”), tolerance ISO h9
bars 3m
ground
h 9
1081 kg
0
200 723 - 158.500|070 723 - 922.000
60-000
bars-3m
ground
h-9-en
15.870
51413215870
CHORNIFER 455 KL
as per AMS 5617, ASTM A564/A564M-19, XM-16
and ASME-SA 564, ASTM F-899-20
~W. Nr. 1.4543, X3CrNiCuTiNb12.9
and french norms NF S94-090
solution annealed (cond. A), ground
in straight length of 3m (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS2630A, Rev. D
diam. 15.87 mm (5/8”),, tolerance ISO h8
bars 3m
ground
h 8
1468 kg
0
130 624 - 1467.500
15-870
bars-3m
ground
h-8-en
1.050
51400501050
Brief description
Designation Klein:
CHRONIFER 455 KL
Class of metals:
Precipitation hardening stainless steel
Material number:
1.4543
Standard DIN:
X3CrNiCuTiNb12-9
Re-melting:
ESR
Machinability:
up to satisfactory
Hardening capability:
up to 55 HRc
Polishing ability:
adapted for mirror polishing
Corrosion resistance:
satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
XM-16 F-899 Instruments Medical steel bars
XM-16 is available in stock as bars/rods. General features: The Chronifer 455 KL (AISI XM-16) is a martensitic precipitation steel, based on fine structure, with high corrosion resistance and high tenacity.
Application field: The Chronifer 455 KL (Custom 455, Ergste 1.4543GG) is a medical steel which is designed for high grade instruments like screw drivers, long shafts, which have to withstand torsion resistance.
The Chronifer 455 KL is a soft martensitic fine steel due to it’s low carbon content. The highest hardness of apprx. 49 HRC can be achieved at condition H900. This is siginificantly higher than the standard PH Grade Aisi 630 (17-4PH) steel. The high hardness enhances the wear resistance and deformation resistance.
Since this steel doesn’t built up Chrome-Carbides, it is not specially recommended for cutting blades.
in spools
drawn
fg 8
74 kg
0
081 009 - 74.000
1-050
in-spools
drawn
fg-8-en
10.000
51413010000
CHRONIFER 455 KL
German no. 1.4543, AISI XM16, UNS S45500
X3CrNiCuTiNb12.9, ~AMS 5617
ASTM A564/A564M, ASTM A313/313M (chem.
ASTM F-899-20, ASTM A959, NF S94 090
stainless steel for precipitation hardening, ESR
solution annealed (condition A)
ground, polisched, in 3m bars (+40/0mm)
end of bars:pointed, chamfered
100% eddycurrent crack tested cl. 4
Swissline, ultrasonic inspected as per
AMS-STD 2154A and AMS 2632A
diam. 10.00 mm, tolerance ISO 286-2/h6
